rana service

Pages

  • Home
  • RANA
  • volcano-box
  • all-phone-reset-codes
  • all-hardware-repair-area
  • mobile-phone-unlocking

26/06/2012

VolcanoBox New Ver 1.3.2 Just Released

VolcanoBox New Ver 1.3.2 Just Released 

Volcano Team present first in the world ADMET T13 / T14 full support & More…


Download Volcano Box 1.3.1 click here

Download Readed file here

VolcanoBox 1.3.0 Added more Samsung Phones




 

Reply With Quote

Volcano Box 1.2.8 Big Blast World’s 1st Original Samsung Phones Format Supported!!

Friday, June 15th, 2012

Volcano Box 1.2.7 beta 7 released



VolcanoBox New Ver 1.3.2 added samsung i8320 & more




VolcanoTool_v1.3.2_.rar - Downloads - GPGIndustries - Forum
RANA MOBILE SERVICE sadananda rana at 6/26/2012 06:31:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

zZ-Key Release zZBBFactory v0.6 Enjoy H0T Summer

zZ-Key Release zZBBFactory v0.6 Enjoy H0T Summer

Tuesday, June 26th, 2012

zZ-Key Release zZNkToolv0.08b MASSIVE NOKIA UPDATE

Saturday, June 16th, 2012
RANA MOBILE SERVICE sadananda rana at 6/26/2012 06:04:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

Cyclone Box Reloaded!!

Cyclone box usb 3.0 bootloader v3.00 released

Cyclone Ioioio! FREE Blackberry Logger/Calculator, FREE DCT4 RPL for Asics 2,5,6,7,11

Monday, May 10th, 2010
Hello, New update for Cyclone Box is Ready.
What is new?
- Blackberry Module added, support all latest 210 MEPs. Unlock is free, and uses server to calculate Unlock Codes.
- If Logger fails somehow, you might still use manual mode (if you know IMEI and MEP)
- All DCT4 RPLs are free now (Included ASICs: 2,5,6,7,11)
- Skin changed back to white one (too many users complained)
- Improved mode transition between Main/Boot (timeout increased)
- Fixed problem when upon adding “New Path” in “Paths” module Root directory was empty
- CBUS stack improved, if box is disconeected during work, it tries to connect it again instead of “CBUS ERROR”
- Minor changes and bugfixes
How it works?
1. Run Blackberry Module
2. Install drivers (skip this if done already)
3. Click “Read Phone”
4. Connect phone to computer
5. Unlock using calculated codes
Here is example BB8310 Unlocked by Cyclone:
Quote:
Waiting for new Blackberry USB Device (timeout 30 seconds)…
New device attached, checking if it’s Blackberry…
Blackberry Found!
PIN: 208B60F9
Opened Channel “RIM CalTask”, Proceeding…
IMEI: 358516020462712
HWV-16835-001-1
ASY-15714-005
MEP-06424-002
VSM-17713-001
CFG-10695-065
SFI-15771-033
APP-21301-001
Calculating Codes using Fetched Data…
Handling device: [Cyclone Team], [Cyclone Box]
Service Tag: 6F1079DB8ADD083018BB1FB147B8DEE6
Cyclone Server (1.0.0.598), Cyclone Box Team 2008, 2009, 2010 – Ready. Please wait…
Codes received: 1
MEP-2 Code: 4910403860764705
All Done!
Where to download?
RapidShare: 1-CLICK Web hosting – Easy Filehosting
Please do not forget also to install Blackberry drivers! You can download latest drivers from here:
RapidShare: 1-CLICK Web hosting – Easy Filehosting
!!! CYCLONE – STOP ME IF YOU CAN !!!

Welcome to Free World of Cyclone Box

Monday, May 10th, 2010

Posted in Cyclone News | No Comments »

** Cyclone fixed Installer v1.06 (DCT4) **

Saturday, April 24th, 2010
!!! INSTALLER v1.06 !!!
(fixed DCT4 and some other critical bugs)
DOWNLOAD LINK 1
DOWNLOAD LINK 2

Cyclone MAJOR Update – New FBUS Protocol (X3,X6) – DCT4RSA(1661,5030) – COM Emulator

Friday, April 23rd, 2010
Hello, New Cyclone Box Installer is READY.
What’s new?
=====================
Installer v1.05
23.04.2010
=====================
- Added support for NEW Nokia BB5 FBUS CMT Loaders (flashing new phones – E52 ST Chip, X3, X6, 5530, etc, etc), supported RAPU,RAPIDO,RAPv4 phones,etc. You can flash your phone using New Protocol, but also manage Reading/Writing Certificates,etc.
- Added support for BB5 FBUS New Protocol APE Loaders
- Added support for Unlock / Relock / Autolock DCT4 RSA Based phones (1661, 5030, 1202, and generally ALL ASIC 11 phones), without patch. Solution is standalone and to unlock one phone takes no longer than 2 seconds.
- Added CS Repair due to Bad Simlock in ASIC11 phones (no patch)
- Latest Nokia Loaders 2010 Introduced (including upgraded RAPv3 old prot algo 9.50)
- Added SD Repair, RPL Calc, etc for RAP3v2 phones (hash E9EFF4BFAA5393217CA6B17755FC3E14)
- Added SIMLOCK BACKUP for SL3 phones (can be restored even after fullerase)
- Added support for NCK Reading, SD Extracting, and more accurate Securtity Analysis for v30.xx phones (N96,5800,etc – so called by “mx” team “sl3″ but in fact is simple sl2), previous versions gave msg about “Decryption fails”
- Added COM Emulator – now Cyclone Box can work as UNI BOX with UFS Pinout !
- Added one-click analyze / repair of Dynamic Camera Configuration (blank screen, “camera not ready”,etc) based phones (DCT4plus, 5310, 7210, 5220, 6700, others) supported Camera Drivers:
GR0103D101260C206C02
GR0103D101260C213402
GR0103D10126095A1F05
GR0103D10126095A1F07
GR0103D10126095A1F87
GR0103D1012601022C00
GR0103D1012601022E05
GR09733814140C206C02
GR0973381414095A1F05
GR0973381414095A1F07
GR0973381414095A1F87
GR097338141401022C00
ISL2TI020000093E2F30
NI00IIIIRR030C20C607
NI00IIIIRR03095B1F00
NI00IIIIRR03095B1F01
NI00IIIIRR030102F200
NI00IIIIRR030102F201
NI00IIIIRR030102F202
NI00IIIIRR030102F203
NI00IIIIRR0301035420
NIMMIIIIRRFF0A021001
NIMMIIIIRRFF094B2F01
NIMMIIIIRRFF06150018
NIMMIIIIRRFF06150110
ST090404003C06150018
ST090404004C06150018
- Added TX2 warning when certificate is being not accepted (common problem while writing RPL)
- Updated Nokia USB Connectivity Drivers to 7.1.22.0
- Upon installation, StoredFiles permission is now set to full to avoid Permission problems (and software is still safe for trojans/etc)
- Folder “StoredFiles” is no longer marked to Delete upon Uninstallation to keep old backup files
- Rewritten BB5 RPL Backup routine, now Certificates are being backed-up first, so even if phone is DEAD, still certs will be backed-up
- Factory defaults after flash are now defaultly ticket (BB5,DCT4)
- Mode transition manager added in firmware v01.37
- Software accept Mode Transision to “Normal” when phone goes to “Power Off”
- Flash Variants are displayed now in descending order
- SL Array readen now upon RPL Backup is Keyb/FBUS Count masked
- Now, all 7 codes are being sent to phone (some phones don’t accept +7 codes – tested on N71)
- Fixed NCK Calculation for some mobiles (Security Section Checksum Error)
- When software detects HWC/CCC/Variant certs mismatch, it tries to write local one from database
- Fixed smartcard not responding for reset in some configurations
- Fixed “Failed to Read SP Info” on older RAPv2 phones
- Path manager – bug “/” fixed
- Fixed problems with StoredFiles managing when software have no enough permissions (occurs on WinVista / Win7)
- SX4 Bypass is removed now (no need anymore)
- Improved sending CMT Secondary Loader
- Fixed TX2 test crash when phone is completly erased (TOC erased)
- Added automatic PM upload with field 1,309 after SX4 Authorization (one-click ST_SECURITY_FIX !), Supported 100+ BB5 phones in local database
- Improved Security Analysis, added HWC/CCC/Variant Certs Check
- Box Firmware : 01.0C, Access Violation Fixed
- Runtime Error when “Disable Skins” enabled fixed
- Taksbar problems fixed
- Fixed 1208 UEM Read/IMEI Rebuild
- N73 booting improved (when backing up crt, writing rpl incorrect loaders was assumed before)
- New Nokia Firmware introduced, improved stability a lot
- DCT4Plus relock fixed
- Mode transition improved
- BB5 USB Flashing fixed
- Factory Set problems fixed
- Fixed problems when dealing with RAP3v2 Phones
- Skin manager upgraded to v6.63
- HW Platform is now being readen upon Box Initialization
- Added support for CTF’2010 Platform
- Flashbus writing speed increased about 10%
- Flashbus FUR messages reading speed increased about 40%
- BB5 Booting procedure rewritten, now no problems in phones like 5800,N97,5200,etc..
- After flashing, added average writing speed display
- BootAgent removed, now Bootloader upgrade is managed by middle-loader
- Main Firmware rewritten from scratch, old bugs gone away.
- MPU Added
- Improved Oscillator startup time, box hangup fixed in some cases
- Realtime clock not used anymore, too much hardware problems when box not started
- Fixed booting dead BB5 mobiles
- If bb5 booting fails, SW displays possible reason reported by new firmware
- BB5 is being try to boot now without hardware VCC switch
- Added USB Dualport transactions (increases speed)
- Added old protocols support (tick “Use Old Protocols Loader”)
- Upon finding CMT/APE loaders, it shows a find parameters (TX2 line, Requested Protocol Type, etc)
- BB5 flash_block_Data checksum fixed
- Additional flash chip information is now shown upon BB5 Alg Boot (VPP Info, Chip Size)
- Fixed boot when after activating DCT4 FTD phone comes to dead
- Fixed “Failed to decode MSID” when flashing some PPM DCT4 files
- UPP ID is now represented as hex upon Read Info
- Added detection whether Pri/Sec camera exists or is configurable
- Minor changes and bugfixes
- Black Skin introduced
- Fixed DCT4 Unlock not being executed after Flashing Procedure
- Versions snap
Installer v1.05
Main x86 Application v1.0.0.9392
x86 Memory Manager v4.92
Native USB Drivers v1.0.0.4
USB-COM Stack Drivers v1.0.0.0
Onboard Secure Bootloader v2.10
Onboard Main Nokia Application v01.37
Onboard COM Emulation Code v1.00
Onboard Security Card Revision v1.09
Nokia Connectivity Cable Drivers v7.1.22.0
BB5 USB/FPIF Single Line/FPIF DualLine v20100410
DCT4 FPIF Single Line/USB v20100410
DCT4 Unlock Patches DEPRECATED
Communication Stack SSLv3-keys-06092008
Skin Stack v6.63
Thanks to all contributors which supporting us! Thanks Moulnisky, ptt, Honey… Thanks arash & others…
Where to download?
Main Link: RapidShare: 1-CLICK Web hosting – Easy Filehosting
!!CYCLONE – BEAT ME IF YOU CAN!!

Cyclone Box Firmware v01.36 Released

Friday, April 23rd, 2010
- Fixed smartcard issues in some enivronments (Smartcard is not responding for reset)
- Fixed issues when some phones couldn’t calculate NCK Codes with new method (Security Section Checksum Error)
- Minor changes and bugfixes
!! CYCLONE – STOP ME IF YOU CAN !!

CycloneBox Present Free DCT4+ Unlock including RSA protected phones Hello,

Tuesday, April 20th, 2010
Hello,
you can download latest beta from here:
RapidShare: 1-CLICK Web hosting – Easy Filehosting
all DCT4+ phones are supported including 1661 , 1662 , 1208, 5030 etc
(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight or tomorrow with some other great and unique features.).
Don’t forget to upgrade box firmware!
Post unlocked phones log in above link
Best Regards
Cyclone Team

Product Manager SiRoYa’s Avatar Join Date: Oct 2002 Posts: 7,191 Member: 16107 Status: Offline Thanks: 109 Thanked 10,345 Times in 726 Posts CycloneBox Present Free DCT4+ Unlock including RSA protected phones

Monday, April 19th, 2010
Hello,
you can download latest beta from here:
RapidShare: 1-CLICK Web hosting – Easy Filehosting
all DCT4+ phones are supported including 1661 , 1662 , 1208, 5030 etc
(please use it only for test DCT4 RSA purposes, full stable installer will be released tonight or tomorrow with some other great and unique features.).
Don’t forget to upgrade box firmware!
Post unlocked phones log in above link
Best Regards
Cyclone Team

CycloneBox Hotfix Released

Wednesday, January 6th, 2010
-Fixed Unlock bug for old BB5 phones
Copy the new exe in X:\programfiles\Cyclonebox\
Download Link
http://rapidshare.com/files/330741437/Cyclone.zip
Cyclone Box Reloaded
Some More Basic Information :
- USB Bus powered only, 5V @ 500mA (2.5W)
- USB 1.0, 1.1, 2.0 and 3.0 Compatible
- Supported Operating Systems: All NT based Windows OS (including x86 and x64 platforms - drivers signed for 64bit) - this includes Windows NT, Windows Xp, Windows Vista, Windows 7, and upcoming
ones
- Lightweight construction
- No Smartcard Connector
- Nokia Flashbus / FBUS RJ48 connector with TX and RX signalling LED. Pinout is UFS/JAF compatible (no need adapters anymore, plug it straight).
- Based on well-tested AVR32 technology in Cyclone Classic, powered by 66MHz 32bit RISC cpu
- Built-in VPP generator for old NOR based phones
- USB signalling led (USB transaction signalling)
- VBAT singalling led (power-up status of Flashbus port)
- Works also as USB dongle for USB-only operations, if USB connectivity with Nokia phones is needed
- Operates 100% standalone (after initial registration)


--------------------------------
The Cyclone box classic is 100% supported and will be supported in all the future updates so no need to worry and keep enjoying your cyclone box
--------------------------------

New CycloneBox Installer v1.20 (03.05.2012)

Things which introduced in new Version

- New Faster and reliable Hw introduced (Cyclone Box Reloaded)
- New Loaders v11.50.00 added
- FastMM v4.99 Introduced
- MEP-40488-004 added
- Xgold113 (Dual-sim) RPL write support added- Project completly refactorized from scratch. Compiler changed from obsolete Delphi7 to Delphi2007. Just because of this, lots of stability and speed improvment gained.
- "News" added in main window
- "New Super Easy Downgrade" BB5 method added (Backup,flash,downgrade,restore rpl all just in one click)Tick in before-flash tasks
- Added Windows 7 interactive progressbar when minimized to tray. When software is minimized, you will notice status of current job: green progressbar - working, red progressbar - error, yellow-paused, etc
- Boot recovery added for all boxes during box wizard
- Added COD->NCK verification upon data generation
- After COD->NCK calculation, NCK codes are automatically stored inside COD file
- New Paths is now addded to default Flash Path Search table (C:\Users\xxxx\AppData... etc)
- Box wizard Added; this is all-in-one tool which will: repair, upgrade, activate, register, bootloader recovery, smartcard refill, bootloader upgrade, etc your box. Just one click.


Improvements

- No need anymore to tick "Old USB flashing method" manually, it's detected automatically
- When Windows 7 is detected, software is not hidden to tray
- Bootloader reverted to v2.13 (temporary solution, v3.01 will get back soon)
- Automatic smartcard refill when empty addded
- Software is redesigned now. To gain full funcionality YOU DON'T NEED run as "Admin". This means you can be ensured about our software quality and security - no hidden trojans (as happened before with other products).
- Splash updated
- Box Registration module removed (box wizard introduced)
- Box Maintenance module removed (box wizard introduced)
- Card Maintenance module removed (box wizard introduced)
- The paths is now updated on each sw startup
- Only one copy of Cyclone Box application can be launched now, this improves stability
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- Skin Stack Updated to v7.62



Bug Fixes

- Windows7 Permission issues fixed (needed "Run as admin" to work properly with autoupdate)
- Fixed Windows7 Save Paths/Settings problem
- BB5 loader problems when skin enbled (ROM refused...etc)
- Access violation on exit fixed
- CBUS Lost Handle Fixed
- "cyclonebox.dll not found" message when no drivers installed changed to suitable message box asking to connect your box first time and install drivers
- libeay/ssleay libraries updated to latest one, much more fast and stable
- NCK Code Sending fixed for SIMLOC30 phones (0x01 error)
- Fixed tray issues
- Autoupdate code is now checking for installed installer, if obsolete then asks for download latest version
- Improved RPL backup in USB mode (Custom Loader didn't reset phone to FlashMode, and some backups did contain Superdongle/Simlock data only)
- XGold/Blackberry Service "Credits" renamed to "Counter" (because it is a counter, not real fee-credits), as it puts too much confusion
- "security problem #1" solved on those who copied cyclonebox.dll before
- Fixed interrupted auto-update problems (after restart - this is not valid Win32 application)
- Minor changes and bugfixes


Important Notes

1. If you are using old (Classic) Cyclone Box and having old Card serial number (2009,2010) and after latest
bootloader upgrade, your box can't enter into bootloader mode, your box boot need Recovery. This will be proceeded AUTOMATICALLY, just use Box Wizard.
2. Box Maintenance, Box Registration, Card Maintenance are removed from this release
3. Your box having 3 firmware update tickets from now: if for any reason you need more just post your request Here
4. Box Firmware v02.01 is required, so this update could be operational
5. Use "Box Wizard". This is one-click tool for box repair (boot recovery), upgrade, activation, registration, smartcard upgrade/initialization, and so on.
6. If you are using Windows 7, autoupdate in old version may fail (fixed already). In case download installer directly, or run SW with Admin privileges.
7. ALWAYS fresh installer you could find at:
http://www.karwos.hk/CycloneBoxInstaller.exe <====== Installer
or
Http://www.moulnisky.com/downloads/C...xInstaller.exe <=========Mirror
8. Autoupdate after updating EXE should ask you for downloading and installing latest installer. If something will fail during Autoupdate process, just look at 7 and download Installer manually.




CycloneBox Classic and Reloaded Official Website

CYCLONE BOX - RELOADED


Cyclone Team Official Facebook page
www.facebook.com/cyclonebox
RANA MOBILE SERVICE sadananda rana at 6/26/2012 05:45:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

MXKey News

MXKEY LAB Official Youtube channel
!!! This product was tested by MXKEY Team !!!
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY DCT4PLUS FREE for ALL MXKEY users for limited number of phones.


v3.4 revision 1.0, Public-Release
Major changes.
MXKEY DCT4PLUS FREE for ALL MXKEY users for limited number of phones.

!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY – Partial update of Nokia Service Tool.

Wednesday, April 28th, 2010

MXKEY – Partial update of Nokia Service Tool.
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY – BootLoader not responding, mostly RAM problem – FIXED

Friday, April 23rd, 2010

MXKEY – BootLoader not responding, mostly RAM problem – FIXED
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.1

Wednesday, April 21st, 2010

MXKEY – Credit transfer api v1.1
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.0

Wednesday, April 21st, 2010

MXKEY – Credit transfer api v1.0
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.1

Tuesday, April 20th, 2010

MXKEY – Credit transfer api v1.1
!!! MXKEY – CATCH ME IF YOU CAN !!!

Product Manager MANOLE’s Avatar Join Date: May 2008 Location: MXKEY probably BEST NOKIA TOOL Posts: 2,062 Member: 780644 Status: Offline Sonork: 100.88888 Thanks: 571 Thanked 46,906 Times in 1,481 Posts MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.0

Tuesday, April 20th, 2010

MXKEY – Credit transfer api v1.0
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.0

Tuesday, April 20th, 2010


MXKEY – Credit transfer api v1.0
!!! MXKEY – CATCH ME IF YOU CAN !!!

MXKEY 1202, 1661, 1662, 5030 – Credit transfer api v1.0

Monday, April 19th, 2010
MXKEY – Credit transfer api v1.0
!!! MXKEY – CATCH ME IF YOU CAN !!!
RANA MOBILE SERVICE sadananda rana at 6/26/2012 05:13:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

Archive for the ‘AXE BOX’ Category

Archive for the ‘AXE BOX’ Category

AXE BOX World First Unlocking Solution For Android G2 [Hero]

Monday, May 10th, 2010

RANA MOBILE SERVICE sadananda rana at 6/26/2012 05:07:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

ATF v8.90 Nitro SD Update!!

ATF v8.90 Nitro SD Update!! Public Discussion Thread:

Introducing the Official ATF Nitro SD Reader.







The ATF Nitro SD Reader enables Micro SD Card Brute-Force and
Factory Formatting Functionalities for ALL ATF Boxes without
Micro SD Card Ports. It also works on the Original ATF Chrome Box.

Features:

Ultra-Fast Communication Speed (upto 25 Mhz for Hi-Speed Capable Cards).
Fastest Brute-Force Speed with Intelligent Card Speed Threshold Adjustment.
First and ONLY Device in the GSM Industry that can retrieve SD Card Passwords without FORMAT.

Compatibility:

Compatible with ATF Lightning, ATF Nitro and ATF Chrome Boxes with LogiCore 10.3.12 or Higher.
Compatible with ALL Micro SD Card Brands that conform or don't conform to the SD Standards.
Compatible with ALL Micro SD Card Capacities (Tested upto 128 GigaBytes).


Flashing Updates:

--> Added Support for Newer Mass Memory Content Files
--> Only Scans Existing VALID Directories for Flash Files
--> Skips MEEGO/MAEMO Flash File Intensive Pre-Parsing


Other Updates:

--> Custom PM Erase Section and Sub Field (For Expert Use Only)
--> Support for ATF Nitro SD Card Reader for SD Card BF and Factory Formatting
--> Added New Phones inside Nokia.ini


Bug Fixes:

--> Fixed AUTO-ADL Flashing Selection on LIVE RAPIDO Phones
--> Fixed Incorrect SP Lock/Open Status on One Specific Service Provider
--> Fixed USB "ULTRA SLOW" Mass Memory Flashing for Built-In EMMC Chip
--> Fixed Some Wrong Entries inside Nokia.ini

Who will buy this if you can get more in ATF?




__________________________________________________ ________________________



Buy only from ATF [Advance Turbo Flasher] authorized resellers:
ATF [Advance Turbo Flasher] Authorized Distributors and Resellers List


ATF [Advance Turbo Flasher] official web sites:
International - http://www.advance-box.com/
RANA MOBILE SERVICE sadananda rana at 6/26/2012 04:56:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

GPGDragon SPD 6800H 1.51 (little bugs fix) GPGDragon V3 Software Come

Spreadtum 6800H Professional platform VER1.51

Fix Pattern lock Show invalid bugs
Add Full Erase before Flash(Need Tick Experts Mode)


where to download?

Form 4Shared: GPGDragon_SPD6800H_Ver 1.51.rar - 4shared.com - online file sharing and storage - download


News for Mstar CPU update!!!


gpgdragon SPD 6800H just one software Support 6800H only,this is no good

but this is new coder for test his software

cause is after this 6800H he can know his software good or not

and you are Love it or not?

Now All is OK!!!

Mstar CPU New Update with GPGDragon V3 software upcoming

here is a little Tip for gpgdragon customers only

www.dhakamobilebd.com Click this bar to view the small image.



We Will Alway Working GPGDragon New Update!!!
We Will Give the Perfect Softawre to GPGDragon customers!!!
We alway give the Best with you!!!
We Love you !!!
Do you Love me also???
RANA MOBILE SERVICE sadananda rana at 6/26/2012 04:52:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest

ATF NITRO Box


  • simple_img
  • simple_img
  • simple_img
  • simple_img
  • simple_img
12345
img GET THE NEW ATF NITRO NOW!!!
ATF Nitro is already PRE-ACTIVATED to work with The ATF Network

Advance Turbo Flasher Nitro
ATF FAQ's..

img
New ATF NITRO Box Released! Pre-Activated!
Introducing the new 
ATF Nitro Pre-Activated Boxes...

The latest addition to ATF Team's Super 
Fast FBUS Flasher Family.

Now Pre-Activated and Ready to work with
The ATF Network.
Just connect it to your USB Port and you
will be ready to Rule the World of Nokia
Phones.

Welcome to The ATF Newtork!

- Authorize RAP3Gv3 Phones (0 Credits)
- Authorize RAP3Gv4 Phones (0 Credits)
- Authorize Rapido Phones (0 Credits)
- Authorize RapuYama v1 Phones (0 Credits)
- Authorize RapuYama v2 Phones (0 Credits)
- Authorize Broadcom 21351 Phones 
(5 ATF NEtwork Credits)
- Upload SL3 BruteForce Unlock Job 
(25 SL3 BF Credits)    

'
 

read more »

Design and Power
Unique Hardware Features.....

img
480 mbps HIGH-SPEED USB 2.0 Connection
( First In World )
- PC connection is 40 times faster 
than any other box in the market

100% FPGA based implementation of the
flash bus  protocols( First In World )
-Significantly faster and more stable
than regular MCU based boxes

Adjustable VCCIO Logic Levels
-Compatible with old phone model Logic
Level (3.30v)
-Compatible with new phone model Logic
Level (2.80v)
-Compatible with future phone model
Logic Level 
(1.80v)

Ultra Fast Flash Clock currently upto
15 Mhz (First In World )
-Firmware updatable to support upto 60
Mhz without the need of hardware
modifications     

'


read more »

Whats New
Newly supported phone models, loaders and features.....

img
HARMATTAN (MEEGO) Flashing Engine Fully Supported
v8.0 Update!!

--> FULL Flash N9-00, N950 and other upcoming 
MEEGO Devices

--> Flash EMMC (Mass Memory)

--> Secure User Data Erase (Removes Phone 
User Lock and Security Settings)

--> Supports Cold Flashing via "Skip ADL Chk" 
(Use only for non-booting Devices)

[ATF Multi-USB Mode Flashing]

Flash TWO BB5 Phones at the same time
The Phones can be different models it can be "DEAD" 
or "ALIVE" This option saves you a lot of time and it 
is very EASY and SAFE to use

Unique USB Flash Procedure

.     

'
read more »
footer_logo
© Copyright Advance-box.Com. All Rights Reserved
(ATF) www.advance-box.com
RANA MOBILE SERVICE sadananda rana at 6/26/2012 04:41:00 am No comments:
Email ThisBlogThis!Share to XShare to FacebookShare to Pinterest
Newer Posts Older Posts Home
Subscribe to: Posts (Atom)

RANA SERVICE

sadananda rana

sadananda rana

RANA SERVICE

  • ►  2015 (2)
    • ►  June (2)
      • ►  Jun 02 (2)
  • ►  2013 (5)
    • ►  December (4)
      • ►  Dec 31 (4)
    • ►  January (1)
      • ►  Jan 10 (1)
  • ▼  2012 (125)
    • ►  October (1)
      • ►  Oct 06 (1)
    • ►  September (50)
      • ►  Sept 08 (24)
      • ►  Sept 07 (26)
    • ►  August (1)
      • ►  Aug 01 (1)
    • ▼  June (57)
      • ▼  Jun 26 (8)
        • VolcanoBox New Ver 1.3.2 Just Released
        • zZ-Key Release zZBBFactory v0.6 Enjoy H0T Summer
        • Cyclone Box Reloaded!!
        • MXKey News
        • Archive for the ‘AXE BOX’ Category
        • ATF v8.90 Nitro SD Update!!
        • GPGDragon SPD 6800H 1.51 (little bugs fix) GPGDrag...
        • ATF NITRO Box
      • ►  Jun 22 (4)
      • ►  Jun 21 (8)
      • ►  Jun 18 (2)
      • ►  Jun 16 (3)
      • ►  Jun 11 (19)
      • ►  Jun 10 (5)
      • ►  Jun 03 (7)
      • ►  Jun 01 (1)
    • ►  May (16)
      • ►  May 30 (2)
      • ►  May 29 (14)

Rana Translate

RANA SERVICE. Simple theme. Theme images by mattjeacock. Powered by Blogger.