|
|
|
|
|
|
|
|
|
HWK Release Minor Suite 2.2.0.3
|
|
Sunday, 6 November 2011
|
|
|
|
|
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Since this is a minor update release, there is no need to update your HWK if you have already updated on the v2.2.0.0 release.
DCTxBB5 v2.2.0.3
-----------------
1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-670,RM-679,RM-681V,RM-701,RM-730,RM-750,RM-763,RM-774,RM-779,
RM-781,RM-814,RM-815,RM-816
(700,T7-00,Vertu Con.T,600,702T,500,303,701,603,300,C5-08,C5-05,C5-06)
2. DCT4 INFINEON Based Products Flashing / UI support added:
RH-130,RH-131,RM-724,RM-725,RM-769 (100,100.1,C2-05,C2-05.1,101)
3. Vertu products names changed to RM-582V, RM-681V to keep compatibility
with DataPackageManager application.
4. New Flashloaders included.
5. Fixed BSOD bug on W7 x64 when Connect Box.
LG_GSM v2.2.0.3
-----------------
1. Infineon:
A190,A190a,A190b Read Lock Keys, Unlock, Dual IMEI Fixed.
2. Infineon EgoldVoice64_ULC2:
KG370,KG375,KG376,MG370a,MG370b added (FL,CUL,DUL,IM)
3. Infineon XMM2130: LG500G,LG800G added (FL)
4. Infineon XMM2150:
A200,A225,A230,A250,A255,A258,C330,T500,T505,T510, T515,
T530 added (FL,DUL)
S365 added (FL,CUL,DUL,IM)
Note: Use [Unlock] before IMEI rebuild.
5. Fixed BSOD bug on W7 x64 when Connect Box.
SAMs v2.2.0.3
--------------
SWIFT-AEROFONE
E1080T-SEA,E1175T-MEA,E1190-CHN,E1195,E1195-CHN,E1230
added (PUNL,PIM,FL)
E1055G info/unlock bug fixed.
xx-DX models renamed to xx-SEA (note: DD is IND not SEA)
E2222 (UNL,SECT,IM)
SWIFT-3G
(CUNL,SECT) fixed for C3630C,C3730C,S3930C
E3213K,i6320C,i6330C,S3710,S3770,S3778,S3830U,S561 0,
S5610K,S5630C added (CUNL,SECT,FL)
INFINEON
IMEI2 Rebuild added for DUOS models.
Minor bugs in AT protocol fixed:
(not read Codes and IMEI Rebuild fails on some models)
Notes:
Some S3550 units stucks on DFFS (CSC) Flashing,
Solution: Untick [Use EBL from FLS Pack] CheckBox.
COMMON
Fixed BSOD bug on W7 x64 when Connect Box.
Many thanks to all those who have supported us!!!
Download link
Alt Download link
|
|
|
|
|
|
|
|
HWK Release Minor Suite 2.2.0.2
|
|
Monday, 22 August 2011
|
|
|
|
|
The Official release is ready in our download area
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Since this is a minor update release, there is no need to update your HWK if you have already updated on the v2.2.0.0 release.
DCTxBB5 v2.2.0.2
-----------------
1. BB5 RAPU Based Products USB Flashing / UI support added:
RM-776 (C3-01.5)
2. DCT4 INFINEON Based Products USB Flashing / UI support added:
RM-692,RM-693,RM-702,RM-713 (C2-02,C2-02.1,C2-03,X1-01)
LG_GSM v2.2.0.2
-----------------
1. Infineon:
A108,A190,A190a,A190b,A210,A210b,GB125R,GC900fGO,G T350f,
KS360GO added.
2. EGV V3-32 and EGV V3-64 Direct Unlock and IMEI enable added.
Note: Use [Unlock] before IMEI rebuild.
3. EGV V3-64 new Flash Chips Support.
SAMs v2.2.0.2
--------------
TRIDENT VISION
for non 8 Digits PCK Fixed.
SWIFT-AEROFONE
E1050-CHN,E1050V,E1086i,E1150-CHN,E1155L,E1180,E1190,E1220i
added (PUNL,PIM,FL)
E1182L added (DUNL,PUNL,PIM,FL)
E1225T,E1182 TFS Flashing bug Fixed.
C3322 Unlock, IMEI, Sections bug Fixed.
B7722,B7732 Slave Part Flashing/Read/E2P added.
QUALCOMM
T669 Added.
INFINEON
C3011,C3560,C3750,C3752 added (CUNL,PUNL,PIM,FL,UFL)
E2232 Flashing bug Fixed.
for non 8 Digits PCK Fixed.
HWK_Suite_Minor_v02.20.002.exe
HWK_Suite_Minor_v02.20.002.exe
|
|
|
|
|
|
|
|
HWK Minor Suite 2.2.0.1
|
|
Monday, 4 July 2011
|
|
|
|
|
Since this
is a minor update release, there is no need to update your HWK if you
have already updated on the v2.2.0.0 release.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.2.0.0, old client versions will no longer work.
You MUST be running HWK software 2.2.0.1 to access support.
DCTxBB5 V 2.2.0.1
-----------------------
1. DCT4+ ASIC2 Unlock Bug Fixed
(RH-92,RH-93,RH-94,RH-95,RM-189,RM-190,RM-225)
2. Wrong Locks Status Indicator Fixed (RH-86,RH-87)
3. Detail Description Message on Bad VPL File Exception.
4. BB5 RAPU Based Products USB Flashing / UI support added:
RM-744,RM-745,RM-775 (C5-00.3,C5-00.2,X3-02.5)
LG_GSM v 2.2.0.1
------------------
1. Infineon:
A100,A100a,A175,A175a,A175b,A180a,A180b,GB102GO,GB 105a,
GB107a,GB125a,GB126a,GS101a,GS101GO,GS107a,GS107b, GS117,
GS155,GS155a,GS155b,GS500f,GU200,GU200a,GU200b,KF5 10c,
KF600c,KF600d,KM570,KM570f,KP105a,KP106a,KP106b,KP 107a,
KP107b,T325g,TE350GO added.
2. ADI:
KP115a,KP130b,KP215a,KP260c,KP265d added.
SAMs V 2.2.0.1
----------------
SWIFT
Some DUOS models Slave Boot bug Fixed.
SWIFT-AEROFONE
E1050,E1055T,E1080W,E1170i E2P Size Fixed.
Max Section Size Increased.
E1182 added (DUNL,PUNL,PIM,FL)
C3303i,C3322,C3500 added (CUNL,DUNL,IM,SECT,E2P)
Note:
C3322,C3500 TFS and CSC Flashing not Supported yet,
use Original Flasher.
SWIFT-3G
C5010B added (CUNL,SECT,FL)
QUALCOMM
A885,A886,F406,S3370B,S3370L added.
INFINEON
E2652,E2652W USB Flahing bug Fixed.
E2152i added (CUNL,PUNL,PIM,FL,UFL)
XGOLD213 BIF file Write bug fixed.
XGOLD213 Patch bug fixed.
BROADCOM
B5310R,C6712,S3853,S5250W added (UFL)
COMMON
Used Abbrevations List can be seen at the Bottom of this page.
Downloads
HWK_Suite_Minor_v02.20.001.exe
HWK_Suite_Minor_v02.20.001.exe
|
|
|
|
|
|
|
|
HWK Release v2.2.0.0
|
|
Sunday, 22 May 2011
|
|
|
|
|
The Official release is ready in our download area
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.2.0.0, old client versions will no longer work.
You MUST be running HWK software 2.2.0.0 to access support.
DCTxBB5 V 2.2.0.0
------------------
1. BB5 products: RM-576,RM-577 (6700s,6700s-1c) added.
2. Local RPL Service Fixed for ASIC 2,5,6,7,11 (UEM_PASW is Correct now)
Note: Need Confirm [Readout and Use UEM IMEI] when do [Rd UEM].
3. [Check Ask/Rpl] Renamed to [Calc Ask/Rpl] as can Calculate RPL now.
4. [Calc Ask/Rpl] Function will Generate Real RPL from ASK file (ASIC 2,5,6,7,11)
Note: When Reading UEM, do not Forget Set Right [UEM Changed] Status !
5. RSA Lock/Unlock for All DCT4+ products (not need Patch)
6. Life Timer added to [PM Edit]
7. DCT4 INFINEON Based Products USB Flashing / UI support added:
RH-111,RH-125,RH-126,RM-607,RM-608,RM-643,RM-644,RM-647,RM-653,
RM-669,RM-689,RM-704,RM-732,RM-733 (1202,1616-2,1616-2b,C1-01,C1-01.1,
C1-02,C1-02.1,1280,1800,1800b,C1-00,C2-00,X1-00,X1-00.1)
8. BB5 RAP3Gv40 Based Products USB Flashing / UI support added:
RM-509,RM-510,RM-511,RM-540,RM-598,RM-604,RM-615,RM-638,RM-721,RM-722
(3710a-1,3710a-1c,3711a-1,X3-00,7230-1c,7230-1,5330-1d,6303ci,C2-01,C2-01.5)
9. BB5 RAPU Based Products USB Flashing / UI support added:
RM-582,RM-596,RM-601,RM-609,RM-610,RM-627,RM-629,RM-632,RM-634,
RM-639,RM-640,RM-645,RM-648,RM-658,RM-659,RM-662,RM-675,RM-682,
RM-688,RM-691,RM-697,RM-699,RM-707,RM-718,RM-719,RM-720,RM-749
(Vertu CQ,N8-00,C6-01,E6-00,E6-00.1,X5-01,5230-1d,E5-00,E5-00.2,X3-02,C3-01,
C5-00.X5-01.2,E73,X7-00.1,C3-01m,C7-00,6702s,C5-00.1,C7-00b,C5-03,E5-00m,
X7-00,C6-01.3,C5-03.2,C5-04.1,C7-00s)
10.BB5 RAPIDO Based Products USB Flashing / UI support added:
RM-484,RM-485,RM-486,RM-551,RM-552,RM-559,RM-588,RM-593,RM-594,
RM-612,RM-624,RM-625,RM-684
(N86-1,N86-3,N86-5,X6-00.1,X6-00m,X6-00,5230-1,5230-1c,5230-1b,C6-00,
C6-00.1,5288,5250)
11.BB5 JUNO (BCM21351) Based Products USB Flashing / UI support added:
RM-497,RM-586,RM-614,RM-618,RM-709,RM717
(7020a-2,2710c-2,C3-00,X2-00,X2-01,X2-01.1)
12.Original SX4 Card Support Added (Use Any PCSC Compatible Card Reader)
LG_GSM v 2.2.0.0
-----------------
1. Infineon:
A110,A130,A133,A133GO,A170,A180,C100,C105,C300,C30 0GO,C305,
C310,GB220,GB220nGO,GB230,GB280,GD350,GD510,GD510N ,GM360,
GM360i,GM600,GS170,GS290,GS290GO,GS290N,GS390GO,GS 500,GS500g,
GS500gx,GS500v,GT350,GT350GO,GT350i,GT360,GT365,GU 220,GU230,
KC550,KC550d,KF510,KF510d,KF600,KF600d,KM380,KM380 c,KM380d,
KM385d,KM386c,KP500,KP500N,KP501,KP502,KP502GO,KP5 05,KP550,
KP570q,KS360,KS365,T300,T310,T310i,T310N,T315,T315 i,T320,
T320e,T320g,T325 added.
Notes:
1. To See Unlock Codes and Instructions, Press [BOOT]
2. To Flash Dead Phones, Tick [Emerg. Boot]
3. FLS and BIN files supported for Flashing.
2. USB Support for Infineon SGOLD3, SGOLDRADIO, XGOLD213.
Note: To use USB Select USB in [Baud] ComboBox.
3. ADI: G210,G220,G232,G233,G259,G262,G263,G610,G622,G632, G635,
G639,G660,G672,G677,C682,G688,G810,G822,G828,G912, GM200,GM205,
GM205GO,GM210,KF245,KG296,LG8930,MG235,MG295,MG296 added.
4. TI: C1300i,C2000,G850,L1400i,MG191a,MG191b,MG200c,MG20 0d added.
5. MTK: A120,A155,A160,A165,GB160a,GB160b,GB161,GB190a,GB2 70,
GS190,GS200,GS205 added.
6. BT Address Write Added for ADI, Infineon and MTK platforms.
SAMs V 2.2.0.0
---------------
TRIDENT
A127,i626,T719,X475 added (DUNL,IM,FL)
OM(SYSOL)
T209,T319 added (DUNL,IM,FL,SECT)
SWIFT
A436,A437,A516,A517,T229,T249,T339,T349-LTA-USA,T369,
T409,T619,T739 added (DUNL,IM,SECT,FL)
Added Multi Drive support for TFS Read.
Fixed SLAVE Boot Bug on some models (D980,D980F,D988)
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-AEROFONE
Added [Patch MSL] Function to Patch without MCU Part Flashing.
C3300i,T109,T119 added (DUNL,IM,FL)
E1050,E1055G,E1055T,E1080F-IND-MEA-SEA,E1080W,
E1081T-EU-IND-MEA-SEA,E1083C,E1085F,E1085F-MEA,E1087T,E1105F,
E1150i,E1160i,E1170i,E1170T,E1172,E1175T-EU-IND,E1178,E1225F,
E1225T,E1225T-IND,E2121L added (PUNL,PIM,FL)
Notes:
1.Mixing of EU IND MEA SEA Files causes Blinking or Dead Sets.
2.E1081T EU E2P Image is not Compatible with IND, MEA or SEA.
3.For Cross Flashing Select Model Name Extension by File type.
4.Before Unlock, Info to see Codes or Rebuild IMEI use
[Patch MSL] Button or Flash with [Patch MSL] Option Enabled.
C3222,C3222W added (DUNL,CUNL)
Note: C3222 Flashing not Supported yet, use Original Flasher.
TFS Extractor and TFS Builder added, Allows to Edit TFS files.
SWIFT-3G
C5010E,E3210 added (CUNL,SECT,FL)
QUALCOMM
A597,A847,A927,B2710D,C5180,S5520,S5580,S6700T,S68 88,T359,T479,
T746,T749 added.
More Versions Support of Hidden Sysinfo models CUNL and UNFR:
A597,A706,A707,A717,A727,A847,A887,A897,A927,B2710 ,B2710D,S3370,
S5530,T359,T469,T479,T559,T659,T746,T749
QUALCOMM+LSI
S8500B,S8530 added (FL)
BROADCOM
S5230N added (FL,CUNL,UNFR,BRP)
S3850,S5260,S5263,S5330L,S5560i,S5750E,S5753E,S723 0B,S7230E,
S7230W,S7233E added (FL)
S5250,S5253,S5330,S5330L,S5333 Boot Repair (BRP)
[QCDI Info] Renamed to [BCMBL Info] for BroadCom Models.
INFINEON
B3310i,C3200,C3200G,C3200L,C3530,C3530L,E2230,E223 0M,E2232,
E2330,E2330B,E2330C,E2530,E2652,E2652W,S3310i,S335 0,S3353,
S3550,S3550C,S3550L added (CUNL,PUNL,PIM,FL,UFL)
Note: for USB Flashing select 'USB0' in [BaudRate] box.
E1151, Now Possible to Flash Read BIN Dump (Size: 007F0000)
Download HWK_Support_Suite_Setup_v02.20.000.exe:
[Download link 1]
[Download link 2]
Download HWK_Major_Suite_Setup_v02.20.000.exe Full:
[Download link 1]
[Download link 2]
Download HWK_Major_Suite_Setup_v02.20.000.exe by parts:
Part 1
Part 2
Part 3
Part 4
Part 5
Part 6
Part 7
Part 8
Part 9
Part 10
DHT1 & 2 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT
Download _DHT.part01.rar
Download _DHT.part02.rar
Download _DHT.part03.rar
Download _DHT.part04.rar
Download _DHT.part05.rar
Download _DHT.part06.rar
DHT3 - Extract to x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT
Download _DHT3.part1.rar
Download _DHT3.part2.rar
Download _DHT3.part3.rar
Many thanks to all those who have supported us!!!
|
|
|
|
|
|
|
|
UFS_SAMs v2.0.10.7
|
|
Thursday, 4 November 2010
|
|
|
|
|
SWIFT-AEROFONE
E2152 FULL, _RD, E2P Write Bug Fixed.
Note: E2152 DX Firmwares cannot be Properly Flashed.
QUALCOMM
B2710,S3370E added.
QUALCOMM+LSI
S8000L added (FL)
BROADCOM
S5620B,S5628i added (FL)
COMMON
Download Link 1
Download Link 2
|
|
|
|
|
|
|
|
HWK Release
|
|
Friday, 15 October 2010
|
|
|
|
|
The Official release is ready in our download area
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
LG_GSM v 2.1.0.6 (HWK Required)
--------------------------------
1. Added NSCK,SPCK,CCK,SIM codes Display for GS10x
UFS_SAMs v2.0.10.6
--------------------
TRIDENT
X427 added (DUNL,IM,FL)
TRIDENT VISION
M2520 added (UNL,CUNL,IM,FL)
Display of USER LOCK Key for All Models.
SWIFT
E2550,E2550D,E2558 added (UNL,SECT,IM)
Notes:
1.Chinese Versions E2550Zxxx select as E2558 for UNL,SECT,IM.
2.E255x PRAM Flashing not Supported yet, use Original Flasher.
B3410C,E2510C,S5050C added (UNL,IM,FL)
Note: Chinese Versions B3410Zxxx select as B3410C.
SWIFT-AEROFONE
C3300D,C3300K,C3303,C3303K added (UNL,SECT,IM,FL) use 530Kom Cable.
E1107-DX,E1107L,E1117-MEA-IND,E1130,E1130B,E1150-MEA-SEA,E1153,
E1160-DX,E1220,E2120i,E2120L,E2121,E1252,E2121B,E2210T,E 2152,
E2370 added (CUNL,PUNL,PIM,FL)
Note: Mixing of DX MEA SEA Models causes Blinking or Dead Sets.
[Restart] Button now Exit TAT mode with Battery.
Auto Exit from TAT Mode when Flashing, not need
Cable or Battery Reconnect after UI functions (Info,IM,..)
SWIFT-3G
J808,S5550,S5550U added (CUNL,SECT,FL)
B7722,B7732 DUOS added (CUNL,SECT,FL) Flashing only Master Part.
C3630C,C3730C,S3930C TD-SCDMA added (FL) use 530Kom Cable.
QUALCOMM
A657,A887,A897,M7600L,S5530,T559 added.
BROADCOM
A697,B3410W added (FL,CUNL,UNFR,BRP)
S5250,S5253,S530,S5333 added (FL)
Boot Repair Enabled for All Broadcom models, use 530Kom Cable.
Some Models have encrypted Boot2.img and don't have uart_boot,
for these models use our released Boot_Repair packs.
Note: S562x with OneNand Flash Chip, Cannot be Repaired.
Added Unlock support(CUNL) for Hidden Sysinfo models (S5560,..)
if have no succes in SysInfo search, need ReFlash, to have untrashed FS
COMMON
Reduced/Full Log of TFS file list progress for OM/Swift.
Improved FileOpen dialog, to Override suggested path
to last used on same model.
Used Abbrevations List can be seen at the Bottom of this page.
DOCUMENTS
Samsung B7722 How to Rev.1
Samsung C3300_C3303 How to Rev.1
Samsung S523x Warning Rev.1
Samsung S7070 How to Rev.1
Samsung Swift-Aerofone MSL3 Models How to Rev.1
Many thanks to all those who have supported us!!!
Download Link 1
Download Link 2
|
|
|
|
|
|
|
|
UFS_SAMs v2.0.10.5
|
|
Monday, 9 August 2010
|
|
|
|
|
TRIDENT VISION
M2513 added (UNL,CUNL,IM,FL)
SWIFT
Added MCU_Id and Type Display.
Increased Preloader boot speed.
QUALCOMM
More Versions Support of Hidden Sysinfo models CUNL (S3370,..)
A877,M7600H,M8800H,S5603T,S7120H,S8300T added.
QUALCOMM+LSI
M8910,M8910B,M8910H,M8910U,S8000,S8000B,S8000C,S80 00H,S8000U,
S8003,S8500,S8500C added (FL)
BROADCOM
C3510T,M3710,S5560H added (FL)
S3650H,S5230C added (FL,CUNL,UNFR,BRP)
INFINEON
Infineon Platform Introduced, See on [Sky/INF] Tab.
E1151 added (CUNL,FL)
DHLT Engine will ask about additional DHLT tables generation.
COMMON
[Refresh] will Auto Select Ports, be sure that Right Model
and Mode is Selected (Untick [QualComm mode] when Flashing !)
Users who not want to wait few hours for 3rd DHLT table generation can
download the files from our Official Rapidshare mirror. The files should
be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT
DHT3.Part1
Download link 1
Download link 2
DHT3.Part2
Download link 1
Download link 2
DHT3.Part3
Download link 1
Download link 2
HWK_Suite_Minor_v02.10.005a.exe
Download link 1
Download link 2
HWK_Suite_Minor_v02.10.005.exe
Download link 1
Download link 2
|
|
|
|
|
|
|
|
HWK minor Update UFS_SAMs v2.0.10.3
|
|
Monday, 17 May 2010
|
|
|
|
|
Please run
the upgrade client after you have installed the software, follow the
instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.
UFS_SAMs v2.0.10.3
-----------------------
V 2.1.0.3
------
TRIDENT
M628N added (DUNL,IM,FL)
SWIFT
A256,J218,S3600i,S3601C added (UNL,IM,FL)
SWIFT-3G
B2703 added (CUNL,FL,SECT,BT)
QUALCOMM
A747,C5510,C5510U,T929 UNLOCK and UNFREEZE added.
Improved Decryption algo, more models UNLOCK and
UNFREEZE supported by Default.
BROADCOM
S5230K,S5230R added (CUNL,FL,BRP)
B5310,S5620,S5628,S7070C added (FL)
Use Samsung Kies drivers for these models (B5310,S562x)
Fixed 'Cannot Find NandInfo !' on some models.
COMMON
Log to file fixed for Trident models.
Introduced New Extremely Fast Key Calculation Algorithm (DHLT)
Need few hours for Tables generation at First Software startup.
But after, Key calculation for Qualcomm, Broadcom and Trident
platforms will take few seconds. DHLT (c)SarasSoft.
HWK_Suite_Setup_v02.0.10.003
HWK_Suite_Setup_v02.0.10.003
Users who not want to wait few hours for DHLT table generation can
download the files from our Official Rapidshare mirror. The files should
be placed into x:\Program Files\SarasSoft\UFS\UFS_SAMs\_DHT
_DHT Part1 _DHT Part1
_DHT Part2 _DHT Part2
_DHT Part3 _DHT Part3
_DHT Part4 _DHT Part4
_DHT Part5 _DHT Part5
_DHT Part6 _DHT Part6
Samsung / Qualcomm USB Drivers can be downloaded here:-
N-Box Old Software UFS Suite
Download Here
Download Here
|
|
|
|
|
|
|
|
UFS_SAMs v2.0.10.2
|
|
Saturday, 27 March 2010
|
|
|
|
|
|
|
Hwk Support Suite v2.0.10.1
|
|
Wednesday, 24 March 2010
|
|
|
|
|
Please run
the upgrade client after you have installed the software, follow the
instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.
UFS_DCTxBB5 v2.0.10.1
-----------------------
1. RM-392,RM-393 (2680s-2,2680s-2b) v6.17 unlock bug fixed.
2. Box Init bug after BB5 flash fixed.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
Download Link 1 - HWK_Suite_Minor_v02.10.001.exe
Download Link 2 - HWK_Suite_Minor_v02.10.001.exe
|
|
|
|
|
|
|
|
Hwk Support Suite v2.0.10.0
|
|
Tuesday, 23 March 2010
|
|
|
|
|
Please run
the upgrade client after you have installed the software, follow the
instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.10.0, old client versions will no longer work.
You MUST be running HWK software 2.0.10.0 to access support.
UFS_DCTxBB5 v2.0.10.0
-----------------------
1. New BB5 products:
RM-381,RM-455,RM-468,RM-492,RM-529,RM-530,RM-570,RM-573,RM578,RM-579,RM-584,RM-599,RM-600,RM-635
(6750-1,6350-1b,5730s-2,6790s-1b,E72-2,E72-1,3208c,6760s-1,2730c-1,2730c-1b,E72-5,6790s-1c,E63-5,2690)
2. New DCT4+ products: RM-590,RM-591 (2220s-2,2220s-2b)
3. More DCT4+ added for unlock (ASIC 3168) see corresponding list.
4. McuSw tag fixed in vpl parser.
5. Fixed time-out bug for some RAPU models.
6. [Det.Log] CheckBox now active, can auto create LOG file.
7. [Info] Shows Camera DCC settings and Status (for both Cameras)
8. [PM Edit] Revised: Read/Write DCC, Simlock Data, Parallel Model.
9. Increased PM read default margins, to have DCC in read PM for DCT4+
10.[Check Ask/Rpl] to Check Ask/Rpl files contents (Asic 2,5,6,7)
11.Fixed [Format] bug for new BB5 Symbian products.
12.ENO File flashing support (E63,E66,..,N97,..)
13.[Locks] for BB5 remade, now calculate codes for SLPA and SL20
14.[Check] Shows PASUBTOC SL related contents.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.10.0
------------------
1. MTK GB160,GB165,GB170,GB175,GB190,GB195,KG198 added.
2. Infineon GB101,GB109,GB110,GB125,GB130,KE858,KP108 added.
3. Infineon New Flash Chip SV7E3204UTA support.
4. ADI KG129,KG248,KG298 added.
5. " Cannot open file " Bug Fixed.
SAMs V 2.0.10.0
----------------
TRIDENT
C158,C158B,C188L,C240L,C258,C260B,C260L,C260M,C300 B,E576,E758,
X138,X180,X468P,X478,X568 added (DUNL,IM,FL)
USB flashing introduced for HPE models (U600,.. Approx. 2x faster)
TRIDENT VISION
B3210,B3310,B3313,C3010S,C3050C,C3053,C3060,C3110H ,M620N,
S3030C,S3500C,S3500H,S3500i,S3501C,S5150,S5150C added (CUNL,IM,FL)
MSL3 bypass introduced (B3210,B3310,B3313,C3060,C3060R,...)
USB UI functions introduced, allows to unlock USB only phones.
USB flashing introduced (Approx. 5x faster)
(Cannot use USB flashing of dead phones which have UL erased or damaged.
RJ45 flashing can be used to recover from erased UL situation)
SWIFT
A177,A226,A227,A237,A257,B3410,B5702,B5712C,B5722, B5722C,C3212,
C3510,C3518,C6112,C6112C,D980F,E200E,E208B,E250L,E 848i,F118,
F278,J150B,M2710,M2710C,M2710L,M3510C,S3100,S3110, S3110C,
S3600C,S3600H,S5200C,T219,T329,T729 added(UNL,IM,FL)
Added ENG flashing for DUOS FOTA models (D988,B5712C,..)
Auth. Boot and Firmware Sign. for Secure models (B5722,C3510,C6112,S3100)
B5702,D988,F265L,S5050 (SECT) bug fixed.
CSC Area format added.
SWIFT-AEROFONE
A137,CC01i,E1070C,E1100C,E1101C,E1107,E1113C,E1120 C,E1210,
E1310C,E1310E,E1360,E1360C,E1360S,E2100C,E2210C,E2 210H added (DUNL,IM,FL)
E1080,E1080C,E1080T,E1085,E1085L,E1085T,E1088C,E11 00H,E1150,
E1150C,E1160,E2120,E2120B,E2120C,E2130 added (CUNL,FL)
SWIFT-3G
C5110,C5130,C5130S,C5130U,J800R added (CUNL,FL,SECT,BT)
P270 (CUNL,SECT) bug fixed.
E2P Write is supported only for C5130,C5130S and C5130U.
QUALCOMM
A551,A561,A637,A746,A747,A766,A767,A811,A821,A827, A836,A837,
A867,C5220,C5510H,C5510U,G508,G508E,M7600B,M7600H, S5350,
S5600B,S5600L,S5608U,S5510,S7120U,S7350C,S7350E,S7 350F,
S7350H,S7350i,S7520U,S8300H,T469,T659,T749,T919,T9 29,U808 added.
Fixed flashing of non page size aligned files (rc1,rc2,ffs)
Added flashing support for QSC62xx models.
UNLOCK and UNFREEZE added for these models:
A551,A637,A767,A827,A837,C5220,F400,S5510,S7350,S7 350C,
S7350F,S7350i,T639,Z170,Z240E,Z360,Z720,ZV40
BROADCOM
QC Legacy BroadCom models introduced:
i6220,S3650,S3650C,S3650M,S3650W,S3653,S3653W,S523 0,S5230G,
S5230H,S5230M,S5230W,S5233A,S5233S,S5233T,S5233W,S 5560,S5560C,
S7070 (CUNL,FL) To read codes use:
[Mobile Info] button using USB Cable (Phone Switched-ON)
and after [QCDI Info] button, using RJ45 Cable (Phone-OFF)
QC Legacy BroadCom models Full Flashing (with BOOT Change)
[BOOT Repair] for QC Legacy BroadCom models added.
Boot Repair and Codes Read is possible only for phones with
NM_20 pin USB/RJ45 connector !
COMMON
Log to file added.
CLONE error message fixed.
Download Link 1 - HWK_Support_Suite_Setup_v02.0.10.000
Download Link 2 - HWK_Support_Suite_Setup_v02.0.10.000
Download Link 1 - HWK_Suite_Setup_v2.0.10.000
Download Link 2 - HWK_Suite_Setup_v2.0.10.000
Samsung / Qualcomm USB Drivers can be downloaded here
N-Box Old Software UFS Suite:
Download Link 1
Download Link 2
|
|
|
|
|
|
|
|
N-Box updates!!!
|
|
Tuesday, 18 August 2009
|
|
|
|
|
The Official release is ready in our download area.
Please run the upgrade client after you have installed the software, follow the instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
Please make sure you un-install all old versions, first HWK Suite, then
HWK Support Suite, you can then install the new software, first HWK
Support Suite and then HWK Suite.
You MUST update your HWK using client 2.0.9.0, old client versions will no longer work.
You MUST be running HWK software 2.0.9.0 to access support.
UFS_DCTxBB5 v2.0.9.0
----------------------
1. New BB5 products: RM-424,RM-465,RM-469,RM-481,RM-482,RM-483,
RM-491,RM-504,RM-518,RM-547,RM-555,RM-561,RM-564,RM-566,RM-602
(6720c-1,5730s-1,E52-1,E52-2,E55-1,E55-2,6710s-1,5530c-2,3720c-2,
6730c-1VF,N97-4,2700c-2,6720c-1b,6730c-1,5800d)
2. New DCT4+ products: RM-519,RM-520 (2720a-2,2720a-2b)
3. New Samsung Flash Chip: 00EC2606 (K8S3215ETF)
4. Corrected VPL parsing for some models (N97)
5. Only NU48F256 left in [1331] option and moved to BB5 Tab.
6. SX4 bypass introduced using temporary NPC certificate erase.
7. [One Boot] option introduced (RAPx based One MCU products)
8. Enabled Files Multiselect, when Writing Certificates.
9. Erase Option for BB5 (for Experts Use Only !)
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.9.0
-----------------
1. Unlock Codes Display for Infineon EGOLD Voice added
(Boot and See NCK Code for Instructions Press UNLOCK)
SAMs V 2.0.9.0
---------------
TRIDENT
T539 added (DUNL,IM,FL)
TRIDENT VISION
Fixed MSL algorithm for some models (C3050,...)
SWIFT
D606,D900E,E260,M2310,P220,S366,S5050,S5200 added(DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B270i,C276,C276L,E1070M,E1070T,E1075,E1075L,E1105T ,E2100B,
E2210B added (DUNL,IM,FL)
QUALCOMM
Manual Port Selection Added
(Use Refresh, After Each Phone Reboot or Reconnect)
(Untic QualComm Mode, Before Flashing)
F480R,i6210,U900W added.
UNLOCK and UNFREEZE added for these models:
A736,A737,F490,G800,G800L,M7600,S5600,U900W,Z400,Z 540
HWK_Support_Suite_Setup_v02.09.000
HWK_Suite_Setup_v02.09.000
Samsung / Qualcomm USB Drivers can be downloaded here:-
N-Box Old Software UFS Suite
Download Here
|
|
|
|
|
|
|
|
HWK Release
|
|
Monday, 8 June 2009
|
|
|
|
|
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.5
----------------------
1. New BB5 products: RM-412,RM-413,RM-443,RM-505,RM-506,RM-507,RM-570
(E75-1,E75-2,6303c,N97-1,N97-5,N97-3,6600i-1)
2. Introducing RAPU-YAMA ASIC: RM-368,RM-431,RM-432,RM-470
(6260s-1,5630d-1,5630d-1b,6700c-1) support added.
3. New DCT4+ products: RH-512,RH-513,RH-514,RH-515,RH524,RH-525,RH-543
(2330c-2,2330c-2b,2320c-2,2320c-2b,5030c-2,5030c-2b,2323c-2)
4. New DCT4+ UNL versions support:
RH-99 v5.91, RH-100 v5.80, RH-105 v5.91, RH-106 v5.80, RM-305 v5.91
(1200, 1200b, 1208, 1208b, 1650)
5. Certificates write error in DL mode fixed.
6. Check is ASIC supported by firmware for DCT4 and WD2 products.
7. Read UEM IMEI or ESN for DCT-4/WD2 ASIC 2,5,6,11 when Rd UEM.
8. Added backup of PM 120 block when make Bk.308 (if exists)
9. Added [Skip Erase] option for BB5 products (for Experts Use Only)
10.Added [1331] option, to switch on/off NU48Fxxx Intel Chips Solution.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
LG GSM V 2.0.8.5
-----------------
1. MTK KG195,KP199,KP220 support added.
2. PCS files support added for MTK models.
3. Cable type indicator.
SAMs V 2.0.8.5
---------------
TRIDENT
B100K,C140i added (DUNL,IM,FL)
TRIDENT VISION
C3010,C3050,C3060R,C3110,C3110C,S3500 added (CUNL,IM,FL)
M120,M128,E1040,S3030 added (DUNL,IM,FL)
B520 Vodafone support added.
(use B520B-V model, not mix with B520, filenames are similar)
(Use [Reset MMI] if phone ask for password without SIM)
New MSL bypass algo introduced (B220,..,C3050,E1410,S3500...)
allows direct codes reading, unlock and IMEI repair.
MSL Repair introduced, allows to repair or use alien E2P
(Repair of "User Fault on Illegal Trial !!" and restore IMEI)
OM(SYSOL)
C160G added (DUNL,IM,FL,SECT)
SWIFT
B2100,C5212,E250i,F265L,F270,J700i,M158,P250,U800E ,X576
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B100i,B210 added (DUNL,IM,FL,SECT)
C270,E1100,E1120,E1125W,E1125-SEA,E1210M,E1210S,E1310B,
E1310M,E1310S,E1360B,E1360M,E2100,E2210 added (DUNL,IM,FL)
(Do not mix B-C-M-L-S-T-EUR-SEA models! More info on support)
B130S,B130T flashing fixed (blinking or frozen phone)
(Must select target firmware as model, e.g. model is B130 and
want to flash B130S, select B130S as the model.)
SWIFT-3G
P270 added (DUNL,FL,SECT,BT)
QUALCOMM
A777,M7600,M7603,M8800C,M8800L,S5600,S5603,S8300N added.
[Write E2P] (NVM) added.
UNLOCK and UNFREEZE added for these models: A411,A777,S7220,
S7330,S8300,S8300C,Z230 (Use [QCDI Info] button to read keys)
Old models UNLOCK and UNFREEZE: Z300,Z500,..,ZM60,..
(these are not in models list, select any model. Use
[Mobile Info] button to read keys & [Unlock] to direct unlock)
We would like for some users to add localisation in their own native
language to the software, localisation is added to SAMs only at the
moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the
selected language, for example Chinese is not my native language and I
would like someone to take over from me and finish/correct as required.
|
|
|
|
|
|
|
|
HWK Release
|
|
Monday, 6 April 2009
|
|
|
|
|
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.4
----------------------
1. Added info about flashed Certificates for BB5.
2. Corrected DCT4+ unlock error messages.
3. Find Product settings by VPL files.
4. New BB5 product RM-458 (6208c)
Do not use external VPP adapter with RX2 enabled
cables, since this will put VPP direct to RX2 and its possible to KILL
the phone.
SAMs V 2.0.8.4
---------------
TRIDENT
B100M added (DUNL,IM,FL)
TRIDENT VISION
B310R added (CUNL,FL)
SWIFT-AEROFONE
E1070,E1100T,E1125 added (DUNL,IM,FL)
QUALCOMM
Increased Comms speed on RJ45 interface.
UNLOCK and UNFREEZE added for these models:
L810,L811
(Use [QCDI Info] button to readout keys)
We would like for some users to add localisation in their own native
language to the software, localisation is added to SAMs only at the
moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the
selected language, for example Chinese is not my native language and I
would like someone to take over from me and finish/correct as required
|
|
|
|
|
|
|
|
HWK Release
|
|
Saturday, 21 March 2009
|
|
|
|
|
The Official release is ready in our download area http://sarunasoftware.com.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
ATRz v2.0.8.3
-------------
1. Fixed clipboard issue on Vista.
UFS_DCTxBB5 v2.0.8.3
----------------------
1. New BB5 products: RM-495,RM-496 (5130c-2,5130c-2b)
2. New DCT4+ products: RH-121,RH-122 (1661-2b,1661-2)
3. New DCT4+ UNL versions support:
1202-2,1202-2b (RH-111,RH-112 v3.00, v3.10)
1661-2 (RH-122 v3.10)
2610,2610b (RH-86,RH-87 v7.11)
2680s-2,2680s-2b (RM-392,RM-393 v4.56, v4.91)
5000d-2,5000d-2b (RH-362,RH-363 v3.50, v3.54)
7070d-2 (RH-116 v6.20)
4. Simlock status detail info for DCT4 and BB5 models added.
5. Fixed clipboard issue on Vista.
Do not use external VPP adapter with RX2 enabled
cables, since this will put VPP direct to RX2 and its possible to KILL
the phone.
LG_GSM V 2.0.8.3
-----------------
1. BIN (TotalBin) files support added for ADI models.
(BIN bundle files open as Code)
2. ADI KP260, KP265 UNLOCK and REBUILD fixed.
3. ADI KP170, KP175 added, cable as for KP130,KP210,KP260
4. LGMDP NV2 format files support for QC NVM Write.
5. User interface localisation.
6. Fixed clipboard issue on Vista.
SAMs V 2.0.8.3
---------------
TRIDENT
C275L,C500L,C506,C510L,C516,E570L,U106 added (DUNL,IM,FL)
TRIDENT VISION
B520B,M310L added (CUNL,FL)
OM(SYSOL)
C145,C161,C168B,M140L added (DUNL,IM,FL,SECT)
SWIFT
C3610C,E200B,E230L,E251L,F270L,F275L,F480L,J700L,P 906,U900L
added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130L,E1110(Euro and Asia),E1110C,E1117,E1117L
added (DUNL,IM,FL,SECT)
Increased flashing speed.
QUALCOMM
G400L,M8800B,V820L added.
UNLOCK and UNFREEZE added for these models:
G400,G400F,G400L,Z150
(Use [QCDI Info] button to readout keys)
COMMON
Fixed clipboard issue on Vista.
We would like for some users to add localisation in their own native
language to the software, localisation is added to SAMs only at the
moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the
selected language, for example Chinese is not my native language and I
would like someone to take over from me and finish/correct as required.
|
|
|
|
|
|
|
|
HWK Release
|
|
Tuesday, 10 February 2009
|
|
|
|
|
UFS_DCTxBB5 v2.0.8.2
----------------------
1. Flash Update Pack problems Fixed.
2. New BB5 products:
RM-247,RM-297,RM-333,RM-334,RM-335,RM-348,RM-349,RM-350,RM-356,
RM-398,RM-399,RM-415,RM-427,RM-428,RM-429,RM-437,RM-449,RM-450,
RM-472,RM-493,RM-494
(N96-1,N96-5,N85-1,N85-3,N85-5,N79-1,N79-3,N79-5,5800d-1,7510a,7510a-b,
6600s,5800,5800,3610a,E63-1,E63-2,E63-3,N96-3,E71-5,E66-5)
3. DC4 Flash Chip 0020883C Fixed.
4. New DCT4 products:
RH-111,RH-112,RH-113,RM-438,RM-439,RM-490,RM-500
(1202-2,1202-2b,7100s-2,7100s-2b,1680c-2b,2680s-2b)
5. New DCT4+ UNL versions support:
1200(RH-99 v5.71,v5.80) 1202(RH-112 v2.80) 1208(RH-105 v5.71,v5.80)
1650(RM-305 v5.71,v5.80)
6. User interface localisation.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
LG_GSM V 2.0.8.2
-----------------
1. Infineon GB100,GB105,GB106,KG285,KG288,KP100,KP105,KP106,KP 107
support added. (BIN bundle files open as FLS)
2. Read/Write for Infineon EGOLD Voice added.
3. Auto Backup for Infineon EGOLD Voice added.
4. ADI KF240, KF300
support added. (BIN bundle files open as Code)
Cable as for KP130,KP210,KP260
5. QualComm models introduced.
SAMs V 2.0.8.2
---------------
TRIDENT
B270 added (DUNL,IM,FL)
TRIDENT VISION
J610 MSL corrected (DUNL,IM)
E215L,M320L added (CUNL,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
M140 added (DUNL,IM,FL,SECT)
SWIFT
J706,L708E added (DUNL,IM,FL,SECT)
SWIFT-AEROFONE
B130,B130S,B130T fixed flashing for HW 0.600
QUALCOMM
ENUMERATION NOT EXIST: 20 bug fixed (up to COM256 supported)
Fixed flashing for OEMSBL V5.32 and higher (M7500,M8800)
UNLOCK and UNFREEZE added for these models:
F480F,M7500(Armani),M8800(Pixon),U700,U700B,U708,U 800,U800F
(Use [QCDI Info] button to readout keys)
S7220,S7350 added.
|
|
|
|
|
|
|
|
HWK Release
|
|
Wednesday, 14 January 2009
|
|
|
|
|
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.0a
-----------------------
1. Flash Fix added to installer
Do not use external VPP adapter with RX2 enabled
cables, since this will put VPP direct to RX2 and its possible to KILL
the phone.
SAMs V 2.0.8.1
---------------
TRIDENT
CC01,P258,U600G added (DUNL,IM,FL)
TRIDENT VISION
B220,B310,B320,B518,B520,B528,J600G,J610,J618,M318 ,M620,M628
added (CUNL,FL)
L320 added (DUNL,IM,FL)
(Use [Reset MMI] if phone ask for password)
OM(SYSOL)
B110 added (DUNL,IM,FL,SECT)
SWIFT
D618,D980,E2510,F250L,F268,F278,G600G,G618,J770,J8 08E,L258,M150,
M200,M3200,M3510,S3600,T429,U708E,U808E added(DUNL,IM,FL,SECT)
D780,D788,D880,D888,D980 SLAVE support added (DUNL,IM,SECT)
J150 fixed (DUNL,IM,SECT)
IM Rebuild added and RAW TFS Read fixed for these models:
D618,D780,D788,D880,D888,D900i,D908i,D980,E200,E20 8,E250,
E250D,E250V,E256,E258,E258D,E251,E251C,E480,E488,E 590,E598,
E740,E747,E830,E838,E2510,F110,F250,F250L,F258,F26 8,F278,G600,
G608,G808E,G618,J150,J210,J700,J708,J770,J808E,L25 8,L310,L600,
L608,M150,M200,M610,M618,M3200,M3510,P180,P260,S36 00,T429,U708E,
U808E,U908E (Need power up phone with battery after IM done !)
SWIFT-AEROFONE
B130,B130S,B130T added (DUNL,IM,FL,SECT)
SWIFT-3G
B2700,J800,L700,L708 introduced (DUNL,FL,SECT,BT)
SKYWORKS
C100 - 'Not Released Yet' bug fixed.
QUALCOMM
F480G,F480H,M7500,M8800,S7330,U900F,U900G,U900K added(FL,INF,REUL)
Added QualComm mode support:
(*#QUAUSB# to enter QualComm mode, QC Debug Interface on USB)
(*#SAMUSB# to enter Samsung mode, QC Debug Interface on RJ45)
QCDI Info, NVM Read, RAM Read added.
UNLOCK and UNFREEZE introduced for these models:
F480x,L760x,U900x,Z240 (Use [QCDI Info] button to readout keys)
COMMON
Stop button added.
User interface localisation.
Update Client V 2.0.8.1
----------------------
Fixed Exception errors on req-fbi process
!!!THERE IS NO NEED TO UPDATE YOUR HWK SINCE 2080 RELEASE IF ITS WORKING OK !!!
We would like for some users to add localisation in their own native
language to the software, localisation is added to SAMs only at the
moment but will be added to other modules in future.
Conditions:-
1. Only 1 contributer per language.
2. You must know how to use the software and what each function does.
3. The chosen language is your native language or you are fluent in the
selected language, for example Chinese is not my native language and I
would like someone to take over from me and finish/correct as required.
|
|
|
|
|
|
|
|
N-Box updates!!!
|
|
Sunday, 14 September 2008
|
|
|
|
|
The Official release is ready in our download area.
Please follow the instructions careful on the above page.
The Update Client is launched after HWK Support Suite install, if you
cancel without making the update, you can run the Update Client again,
by selecting the shortcut on the
Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.0
----------------------
1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
LG_GSM V 2.0.8.0
-----------------
v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.
SAMs V 2.0.8.0
---------------
TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.
SeDBx v2.0.8.0
---------------
DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.
USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver
SeDBx Quick Guide has been updated.
|
|
|
|
|
|
|
|
HWK Release
|
|
Sunday, 14 September 2008
|
|
|
|
|
Please follow the instructions careful on the above page.
The Update Client is launched after HWK Support Suite install, if you
cancel without making the update, you can run the Update Client again,
by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, t-09-14his software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.8.0
----------------------
1. New BB5 products:
RM-207,RM-235,RM-236,RM-257,RM-270,RM-277,RM-325,RM-328,RM-342,
RM-343,RM-345,RM-346,RM-352,RM-354,RM-355,RM-357,RM-358,RM-359,
RM-367,RM-378,RM-379,RM-386,RM-387,RM-396,RM-397,RM-400,RM-407,
RM-408,RM-409,RM-410,RM-411,RM-414,RM-416,RM-417,RM-418,RM-419,
RM-420,RM-422,RM-425,RM-436,RM-462
(6263,N78-1,N78-5,3555b,3555,3555c,6600f-1c6220c-1,N78-3,E66-1,E66-2,
E71-1,3600s,7610s,7610sb,E71-2,5610d-2,5610d-2b,6210s-1,7310cb,7310c,
6210s-5,6220c-5,6212c,6500c-5,6650d-1c,E71-3,6210s-1c,5320d-1,5220b,
5220,6600s-1c,5320,5320d-1b,5320,6210s-1b,E66-3,6124c-1,6122c,7210c,E71-5)
2. New DCT4 products:
RH-116,RH-117,RH-118,RM-391,RM-392,RM-393,RM-394,RM-395
(7070,7070b,1681c,2760h,2680s,2680s-2b,1680c-2,1680c-2b)
3. New DCT4+ UNL versions support:
1200 (RH-99 v5.51,v5.53), 1200b (RH-100 v5.32)
1208 (RH-105 v5.51,v5.53), 1208b (RH-106 v4.00,v4.11,v5.23,v5.32)
1650 (RM-305 v5.32,v5.51,v5.53)
1680c-2,1680c-2b (RM-394,RM-395 v5.61,v5.63)
2610,2610b (RH-86,RH-87 v6.73,v7.10)
2630 (RM-298 v5.61)
2760 (RM-258 v4.20,v5.61), 2760b (RM-259 v4.20,v5.61)
2760h (RM-391 v5.45)
4. Fixed minor bugs.
5. New Flash Update Pack 8.36.2.35145
Do not use external VPP adapter with RX2 enabled
cables, since this will put VPP direct to RX2 and its possible to KILL
the phone.
LG_GSM V 2.0.8.0
-----------------
v 2.0.8.0 (HWK Required)
-------
1. Added "FSct0" (Force Sector 0 Overwrite) Checkbox in
Infineon platform.
Use it for Frozen or blinking phones (KE800,..)
2. KP130, KP210, KP215, KP260, KP265 support added.
SAMs V 2.0.8.0
---------------
TRIDENT
S730i (DUNL,IM,FL)added.
B200,B300 DUNL and IM fixed.
Reserved Regions values revised and fixed.
MSL Repair enhanced, and added for following products:
C17x,C26x,C520,E84x,E90x,E95x,F21x,M300,M60x,P520, U10x,U30x,X82x
"Erase NOR" activated.
Enhanced 4CC protocol handler (fixed error on PC busy)
TRIDENT VISION
E21x,J60x fixed (INF,DUNL,IM)
M310 added (FL,CUNL)
Enhanced 4CC protocol handler (fixed error on PC busy)
OM(SYSOL)
A117,C288,M130L added (DUNL,IM,FL,SECT)
E746 bug fixed.
SWIFT
D780,D788(Duos2),D828E,E251,E251C,E258D,F110,G808E ,J210,L310,
P180,P200,P260,P850,P858,T309,T509,U908E,X700N (DUNL,FL,SECT)
F488E,J150 (FL,CUNL) Use 'Unlock E2P' to see Codes.
E35x,E37x,T809 DUNL, SECT and IM fixed.
E480,E488 bug in DUNL,SECT fixed.
D880-Duos flashing bug in 2.0.7.2 fixed.
X700 SECT fixed.
SWIFT-AEROFONE
B130 introduced(FL,CUNL) Use 'Unlock E2P' to see Codes.
QUALCOMM
A411,A412,A701,A706,A707,A711,A717,A727,A736,A737, A801,A817,
F330,F338,F400,F408,F480,F488,F490,F510,F550,F700, G400,G800,
G800B,G800L,G808,J200,J200L,J208,J630,J638,L170,L7 60,L760G,
L768,L810,L811,P910,P920,P940,P950,P960,T639,T819, U700,U700B,
U708,U800,U800F,U900,U900U,U908,V705,V706,V707,V70 8,Z150,Z170,
Z230,Z238,Z240,Z240E,Z248,Z310,Z360,Z368,Z400,Z540 ,Z548,Z560,
Z570,Z720,Z728,Z740,ZV40,ZV50,ZV60 introduced (FL,INF,REUL)
COMMON
Product Langpacks description added (Info and MCU-Open)
Note, real menu languages can differ from listed here,
for different models, firmware versions. Languages in
brackets is not mandatory for current Region.
SeDBx v2.0.8.0
---------------
DB2010
1. Added Support for: 36Brown, 49Brown
DB2012
1. Added Support for: 50Brown, 51Brown, 51Red, 53Red.
2. Added CID Upgrade.
DB2020
1. Added Support for: 49Brown.
2. Loaders Updated.
PNX5230
1. Added Support for: 49Brown, 52Brown.
2. Loaders Updated.
USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver
SeDBx Quick Guide has been updated.
|
|
|
|
|
|
|
|
UFS_DCTxBB5 v2.0.7.2
|
|
Friday, 23 May 2008
|
|
|
|
|
The
Official release is ready in our download area
http://sarunasoftware.com.
Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7.x
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.7.2
----------------------
1. New DCT4+ versions support:
1200b(RH-100 v5.06)2600c(RM-340 v561)
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
SAMs V 2.0.7.2
---------------
TRIDENT
B100,B108,B200,B300,S710i added (DUNL,IM,FL)
B100,U600,U600B MSL Repair introduced.
OM(SYSOL)
C420,C420L,C421,C425,C426,X560,X560L,X566
added (DUNL,IM,FL,SECT)
SWIFT
E747.F250,F258,J700 added (DUNL,FL,SECT)
Chinese FOTA products E838, J708 flashing.
Added sectors count for RAW NAND read.
COMMON INFO
Product filter added.
SeDBx v2.0.7.2
---------------
1. USB Flashing introduced.
2. CID53 Support for DB2020 and PNX5230 platforms.
3. CID Upgrade introduced.
4. FS Upgrade files flashing. (FSUPG)
5. GDFS Info now Displays User Lock code for DB2012 models also.
USB Drivers are installed to X:\Program Files\SarasSoft\UFS\UFS_DBX\USBFlashDriver
SeDBx Quick Guide has been updated.
|
|
|
|
|
|
|
|
UFS_DCTxBB5 v2.0.7.1
|
|
Tuesday, 20 May 2008
|
|
|
|
|
The
Official release is ready in our download area
http://sarunasoftware.com.
Since this is a MINOR release there is NO need to update your HWK, there is also NO need to remove HWK Suite v2.0.7
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.7.1
----------------------
1. New BB5 products: RM-337,RM-364,RM-365,RM-366,RM-451
(6300i,3120c-x,8800e-5)
2. New DCT4 products: RM-340,RM-341,RM-362,RM-363
(2600c-2,2600c-2b,5000d-2,5000d-2b)
3. Flash Update pack (8.6.1.31560) added.
4. New RAP, UPP ASIC's and FLASH Chip's support.
5. New DCT4+ product unlock (see corresponding list)
6. BB5 ASK file will be created during "Rd Cert"
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone.
|
|
|
|
|
|
|
|
HWK suite 2.0.7.0 Release
|
|
Friday, 21 March 2008
|
|
|
|
|
The
Official release is ready in our download area
http://sarunasoftware.com.
Please follow the instructions careful on the above page.
The Update Client is launched after HWK Support Suite install, if you
cancel without making the update, you can run the Update Client again,
by selecting the shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
NOTE: Support Access is via the software modules only, download managers have been limited to 3 connections.
UFS_DCTxBB5 v2.0.7
--------------------
1. New BB5 products:
RM-179,RM-223,RM-233,RM-244,RM-256,RM-264,RM-269,RM-278,RM-279,
RM-313,RM-314,RM-320,RM-321,RM-322,RM-323,RM-397,RM-421,RM-426
(N81-1,N81-3,8800e-1,E51-1,N81-5,7900d-1,N81-6,6500s-5,5610d-5,N82-1,
N82-2,N95-2 8G,N95-6 8G,6301,6301b,6500c-5,N95-4,E51-2)
2. ISM flashing support for BB5 products.
3. Improved DCT4/WD2 Flash Loaders version display.
4. Fixed BB5 PM file open bug.
5. Improved Extended PHONET messages handling.
6. Store of Ext.VPP setting in INI file.
7. Support of new Flash Chips.
8. Fixed CNT flashing for 7370 and 6151.
9. Flash Update pack (7.46.43.30662) added.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone. This has
always been the case with 7 pin cables, but from this release 7 pin
cables are supported by UFS+HWK.
UFS_LG_GSM v2.0.7
-------------------
1. KG280, KP200, KP202, MG280 support added.
UFS_SAMs v2.0.7
-----------------
TRIDENT
C170,C178,C188,E210,E218,E840B,E848,E870,E878,E888 ,E958,
F210,F218,P520(Armani),M608,T519,T629,U600B,U608B added.
OM(SYSOL)
C160,C160B,C160L,C160M,C166,C168,C180,C450,C458,CC 03,
M110,X540,X550 added.
E2P unlock fixed for E420,E428...
Implemented MSL calculation, allows direct unlock
without E2P corruption and shows correct codes.
Rebuild of corrupted Master Key during wrong unlock.
IMEI rebuild for new models (Sysol3)
SWIFT
D880,D888(Duos),E746,G608,L600,L608,M610,M618 added.
Implemented MSL calculation, allows direct unlock, and
show correct codes, without any data lose or setting to
default values of MSL, BTID, IMEI or Radio settings.
E2P Sections Read/Write introduced (compatible with TAT)
IMEI and BTID rebuild.(Imei option for Swift_1 only now)
Fixed bug of 0 length TFS files flashing (affected:
java appletts in D880, E200, E250, G600, M610 products)
COMMON INFO
E2P(hee)sections R/W allows to transfer calibration data,
radio setttings, etc. from product to product, without
damage to other vital data, unlike E2P or FULL clone.
Or allows to Read-Edit-Write well known values.
Warning,
Access to some sections can be denied by firmware, or
can have different values dependand on firmware version.
In case of protected or none existing section will have
result length of 0 or lose of TAT mode.
|
|
|
|
|
|
|
|
The Official release
|
|
Monday, 29 October 2007
|
|
|
|
|
The Official release is ready in our download area http://sarunasoftware.com/cardmain.php?dir=HWK_SW/.
Please run the upgrade client after you have installed the software, follow the instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software
may not work properly, so use at your own risk.
New Users or users who un-installed the old version, should download and
install the HWK Support Suite and run the client, before trying to
install the full HWK Suite
|
|
|
|
|
|
|
|
UFS_SeDBx v2.0.6
|
|
Sunday, 28 October 2007
|
|
|
|
|
1. "Skip Info Checking" allows reflash dead phones.
2. "Support" button, to access support site.
|
|
|
|
|
|
|
|
UFS_SAMs v2.0.6
|
|
Sunday, 28 October 2007
|
|
|
|
|
COMMON
Remade user interface.
"Support" button, to access support site.
TRIDENT
E950,F200,J600,J600E,J608,U300,U308,X830N added.
Read Codes for J600,J600E,J608
SWIFT
E598,E768,G600 added.
Unlock Codes on Info for D820,D900,E250,E740,G600.
|
|
|
|
|
|
|
|
UFS_LG_GSM v2.0.6
|
|
Sunday, 28 October 2007
|
|
|
|
|
1. KG290 support added.
2. "Support" button, to access support site.
|
|
|
|
|
|
|
|
UFS_DCTxBB5 v2.0.6
|
|
Sunday, 28 October 2007
|
|
|
|
|
1. Dual
Line flashing for BB5 introduced (Required UFS firmware V2.8 2007)
2. All avalaible phones supported (including RAPIDO v1.12, v1.13)
3. "Verify" function for BB5 added.
4. Latest Flash Update pack (7.40.35.29728) supported.
5. Support of Muxed Nand.
Do not use external VPP adapter with RX2 enabled cables, since this will
put VPP direct to RX2 and its possible to KILL the phone. This has
always been the case with 7 pin cables, but from this release 7 pin
cables are supported by UFS+HWK.
|
|
|
|
|
|
|
|
LG_GSM V 2.0.5.7
|
|
Thursday, 13 September 2007
|
|
|
|
|
1. Infineon SuperGold2 models unlock (KE850,KE970, ...)
2. KE970GO added (KE970G)
|
|
|
|
|
|
|
|
SAMs V 2.0.5.7
|
|
Thursday, 13 September 2007
|
|
|
|
|
TRIDENT
C520,M300,M600,X526 added.
|
|
|
|
|
|
|
|
SeDBx V 1.0.5.7
|
|
Thursday, 13 September 2007
|
|
|
|
|
1. DB2020 User Lock code reset to 0000.
2. GDFS Info (Displays User Lock code for non DB2020 models)
|
|
|
|
|
|
|
|
New Support Area Access
|
|
Monday, 20 August 2007
|
|
|
|
|
New
Support Area Access - All you need is an Original HWK who's HID is in
the master database (can be updated with update client), no username, no
password, no waiting for activation. - We hope you will all enjoy this
small gift and it will make ours and our customers lifes easier
LG_GSM V 2.0.5.6
-----------------
1. API Updated to allow support access (No user update)
SAMs V 2.0.5.6
---------------
1. API Updated to allow support access (No user update)
SeDBx V 1.0.5.6
---------------
1. Initial Public Release - This module will be updated over the next
few weeks to become inline with the rest of the HWK Suite of Modules.
|
|
|
|
|
|
|
|
LG_GSM V 2.0.5.5
|
|
Saturday, 4 August 2007
|
|
|
|
|
1. Fixed support of Spansion MirrorBit Flash chips.
2. Infineon SuperGold2 models added (KE850,KE970, ...)
3. Infineon EgoldVoice models added (KG270,KG271,...)
Warning Infineon models works with battery only !
4. Mediatek models added (C2500, C2600, ...)
|
|
|
|
|
|
|
|
SAMs V 2.0.5.5
|
|
Saturday, 4 August 2007
|
|
|
|
|
TRIDENT
E840,F300,F308,U100,U108 added.
Full Reset(*2767*3855#)is mandatory after flashing !
If make Asia<>EU change, use *2767*3855# before flashing.
SWIFT
D900i,D908i,E200,E208,E390,E398,E590,E740,E830,E83 8 added.
|
|
|
|
|
|
|
|
SAMs V 2.0.5.4
|
|
Tuesday, 29 May 2007
|
|
|
|
|
TRIDENT
U600,U608 added.
"Test Mode" enter improved.
Warning about Battery usage, during UI operations.
Corrected Reserved Regions for some models(D83x,D84x,E90x,P31x,X82x)
Added MSL calculation, allows direct unlock and show correct codes for
new models(D83x,E570,E90x,P31x,U60x,X5xx,X63x,X68x,X8x x,.)
IMEI challenger implemented, allows rebuild IMEI for new models.
|
|
|
|
|
|
|
|
DCTxBB5 v2.0.5.3
|
|
Wednesday, 23 May 2007
|
|
|
|
|
|
1. Modified BB5 codes enter, to allow unlock "Counter Expired".
|
|
|
|
|
|
|
|
DCTxBB5 v2.0.5.2
|
|
Monday, 14 May 2007
|
|
|
|
|
1. Added BB5 files integrity check, while flashing.
2. Fixed some minor bugs in "Init SimLocks".
3. Added Dejan solution for BB5 ("Locks") 6630,6680,6681,n70,n90 etc... Test others on your OWN risk!
|
|
|
|
|
|
|
|
DCTxBB5 v2.0.5.1
|
|
Thursday, 10 May 2007
|
|
|
|
|
|
1. Revised "Init SimLocks" function, now allows direct unlock of
1600(RH-64,RH-65)and other models.'
|
|
|
|
|
|
|
|
DCTxBB5 v2.0.5.0
|
|
Monday, 30 April 2007
|
|
|
|
|
1. New BB5
products: RM-101,RM-188,RM-208,RM-260 (N92-2,6086,E65-1,6086b)
2. New DCT4 products: RH-94,RH-95,RH-97,RH-98,RM-225.RM-229
(1112,1112i,6060v,6061,6030b,6030)
3. New CDMA products: RH-71,RH-77,RH-89,RM-121(2125,2126i,2118,2115i,2355)
4. New CDMA TIKU products:
RM-41,RM59,RM-60,RM61,RM-66,RM-124,RM-125,RM-154,RM-193
(3155,3155i,6155,6235,6236i,3152,6265,6265i,2855,6 165,6275,2865)
5. Support of new Flash update pack 7.4.13.26017, new Flash chips added.
6. Improved F-Bus polling, fixed "Bad Resp UFSx" after fatal error.
7. Improved diagnostics of "Dead APE" and not recognized Flash chips.
8. Fixed "Patch" option bug.
9. UDA(CP) flashing for RM84,RM99 (N70-1,N70-5)
10.Self Tests monitor introduced.
11.Unlock of DCT4+ (BB4.1 ASIC 2 & 11) phones.
12.Certificates backup for BB5 phones introduced ("Rd Cert"and"Bk.308"for SL_Data)
13.BB5 File System Format introduced.
14.Windows Vista(tm) 32bit OS support.
|
|
|
|
|
|
|
|
LG_GSM v2.0.5.0
|
|
Monday, 30 April 2007
|
|
|
|
|
1. KG110, KG320 support fixed.
2. Added new models.
3. Windows Vista(tm) 32bit OS support.
|
|
|
|
|
|
|
|
SAMs v2.0.5.0
|
|
Monday, 30 April 2007
|
|
|
|
|
COMMON
Windows Vista(tm) 32bit OS support.
Cut Power option (Restart - power on mobile)
TRIDENT
C140,C216,C240,C250,C260,C266,C268,C308,P310,P318, X166,X636 added.
MSL1 bypass, allows direct unlock.
OM635x
E635 added.
SWIFT
E256,E376,E480,E488,E736,E750,E758 added.
E25x direct unlock.
Full TFS Read, TFS editor.
Option to exclude E2P part from MCU read.
All other modules have been updated to include Windows Vista(tm) 32bit OS support.
|
|
|
|
|
|
|
|
UFS Release v3.04.002
|
|
Saturday, 3 March 2007
|
|
|
|
|
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
NOTE: IF YOU HAVE UPGRADED YOUR UFS + HWK SUCESSFUL WITH SUITE V3.0.4 or
V3.0.4.1, THERE IS NO NEED TO USE THE CLIENT AGAIN IN THIS VERSION
This installer contains a new Update Client (v2.0.4.2) which will fix a
"1112 exception error" which some users have had. There is no need to
perform the server part within the client to fix the 1112 error, e.g.
Next, Wait..., Quit is enough.
DCTxBB5 v2.0.4.2
-----------------
1. New BB5 products:
RM217,RM222 (6300,6300b)
2. PM Write: cofirmation to overwrite security data (21,120,208,308)
SAMs v2.0.4.2
--------------
COMMON
Cables description added.
TRIDENT
MVN CTS flashing fixed (X830 'Unknown File System' error)
FDI CTS flashing fixed (E570,X630,X680 Empty folders)
Full Reset (*2767*3855#) is mandatory after CTS flashing !
X838 added.
|
|
|
|
|
|
|
|
The Official release will be ready in our download area www.n-box.org/support.php
|
|
Saturday, 27 January 2007
|
|
|
|
|
The
Official release will be ready in our download area
www.n-box.org/support.php
Mirror link
Please run the upgrade client after you have installed the software, follow the instructions careful.
The Update Client is launched after install, if you cancel without
making the update, you can run the Update Client again, by selecting the
shortcut on the Start Menu:-
Programs\SarasSoft\UFS\Utilities\Update Client
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
UFS_DCTxBB5 v2.0.4
--------------------
1. New BB5 products:
RM43R,RM100,RM140,RM146,RM147,RM158R,RM174,RM181,R M209,RM291
(N91-2,N92-1,7390,5300,5300b,N91-6,5200,5200b,7373,2626) introduced.
2. RM170,RM171(E50-1,E50-2) fixed.
3. New Flash update bundle support (6.44.047)
UFS_LG_GSM v2.0.4
-------------------
1. M4410 support added.
2. UI functions added for LG models.
3. Added BIF->MOT, BIN->MOT conversion.
UFS_SAMs v2.0.4
-----------------
TRIDENT
C300,D830,D836,D838,D840,D848,E570,E906,S401i,X156 ,X160,
X160b,X168,X461,X481,X510,X518,X520,X530,X680N,X81 0,X818,
X830 added (Unlock works with battery only !)
SWIFT
E250,E258,E500,E780,E786,E788 added.
Direct unlock for new models (D900,D820...)
OM635x
E420,E428 added.
X65x - Unlock E2P feature added.
S50x - Fixed "Full" flashing bug, E2P R/W added.
|
|
|
|
|
|
|
|
UFS Release
|
|
Wednesday, 18 October 2006
|
|
|
|
|
UFS_DCTxBB5 v2.0.3
-------------------
1. New Flash update bundle support (6.35.036)
2. Fixed bug in MM_Erase for TIKU models RM-165 (8800d)
3. Improved path search routines.
UFS_LG_GSM v2.0.3
-------------------
1. KG210,KG220,KG221,KG225,KG240,KG245 support added.
UFS_SAMs v2.0.3
-----------------
TRIDENT
I300,I308,I320,X680,X688 added.
CTS flashing (D520,D528,X680,X688)
SWIFT
E370,E378,E380,E388 added.
Introduced Unlock E2P for MSL phones (D900,D820,E370,...)
Read E2P shows info (IMEI, Lock Status, Unlock Codes)
Please Note: I300 / I320 PDA Flash is also supported by a third party utility, check the start menu after install.
The Drivers are installed to:-
\Program Files\SarasSoft\UFS\UFS_SAMs\PDAFLASH_I3xx\Driver\ or your localised path for none english windows.
|
|
|
|
|
|
|
|
UFS Release
|
|
Saturday, 23 September 2006
|
|
|
|
|
The Official release is ready in our download area.
New cable schema's are included with the installer, check Start Menu\Programs\SarasSoft\UFS\Documents.
UFS_DCTxBB5 v2.0.2
--------------------
1. New BB5 products:
RM67,RM86,RM87,RM106,RM112,RM123,RM132,RM133,RM145 ,RM199,RM200
(N71-1,6136,5500d,5500,N71-5,6233,N73-5,N73-1,6234,6136b,6151) introduced.
2. New DCT4 ASIC support added.
3. New DCT4 products RH86,RM165 (2610,8800 Sirocco)
4. Fixed VPP control.
5. Fixed support of new Flash update packs. (Flash Pack v6.32.029 included.)
6. Fixed minor bugs.
UFS_LG_GSM v2.0.2
-------------------
1. Sharp Gsm products added: GX20,GX30,GX30i,TM100,TM150,TM200
UFS_SAMs v2.0.2
-----------------
COMMON
Introduced E2P Read/Write. Allows easy backup/edit E2P
areas to repair or rebuild CAL data for new models.(Locks etc...)
TRIDENT
C130,E900,E908,S500i,X210,X218,X500,X508,X630,X638 ,X820,
X828 added (Unlock works with battery only)
CTS flashing (E900,E908,X630,X638,X820,X828)
SWIFT
D900,D908,X670,X678 added.
Corrected problems with TFS read.
NOR Erase.
Direct unlock for older models.
OM635x
X650,X658 added.
NOR Erase.
|
|
|
|
|
|
|
|
UFS_ATRz v2.0.1
|
|
Friday, 30 June 2006
|
|
|
|
|
UFS_ATRz v2.0.1
-----------------
1. Fixed "Wait..." bug for J200,J210,Z200.
UFS_DCTxBB5 v2.0.1
--------------------
1. Corrections to handle 64->128 conversion for new softwares.
2. New flash chips supported (Amd,Spansion,Intel,ST)
3. Bugs in PM_Edit fixed.
4. 64->128 conversion for BB5 phones.
5. New BB5 GSM products: RM10,RM24,RM89,RM180 (E70-1,E70-2,E61-1,N72-5)
UFS_LG_GSM v2.0.1
-------------------
1. New products added (S5200,KG800,..)
2. New flash chips support added.
3. Multiregion files fixed for ADI.
4. Fixed read bug ("not Defined Region")
UFS_SAMs v2.0.1
-----------------
TRIDENT
S400i added (Unlock works with battery only)
SWIFT
E360,E368 added.
UFS_DCTxBB5 v2.0.0
--------------------
1. New BB5 GSM products:
RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126
(E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products:
RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161, RM162,
RM166,RM167,RM189
(1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112 ,6103,6102i,
6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.
UFS_LG_GSM v2.0.0
-------------------
1. Automatic MOT to BIF conversion.
2. New products added.
3. Fixed T5100 flashing.
UFS_SAMs v2.0.0
-----------------
TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308,
X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.
Please run the upgrade client after you have installed the software,
follow the instructions careful as you may need to run the update client
more than once.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
|
|
|
|
|
|
|
|
ATRz v2.0.0, DCTxBB5 v2.0.0, LG_GSM v2.0.0 & SAM v2.0.0
|
|
Tuesday, 30 May 2006
|
|
|
|
|
UFS_ATRz v2.0.0
-----------------
1. Added support for J220,J230,Z300.
UFS_DCTxBB5 v2.0.0
--------------------
1. New BB5 GSM products:
RM-49,RM-78,RM-79,RM91,RM92,RM-115,RM-126
(E60,6280,6282,N80-5,N80,6131/6133,6126/6133b) introduced.
2. New DCT4 products:
RH65,RH69,RH86,RH87,RH92,RH93,RM9,RM33,RM83,RM161, RM162,
RM166,RM167,RM189
(1600b,1110b,2610,2610b,1112b,1112,7270b,8801,6112 ,6103,6102i,
6070,6070b,2310)
3. Fixed PM_Edit, to show BB5 security code.
4. North America BB5 product: RM-99 (N70-5) introduced.
5. Fixed RM-38 (3250) flashing.
6. CDMA products RH-66,RM-97 (2115i,2116,2116i,2255) introduced.
UFS_LG_GSM v2.0.0
-------------------
1. Automatic MOT to BIF conversion.
2. New products added.
3. Fixed T5100 flashing.
UFS_SAMs v2.0.0
-----------------
TRIDENT
C120,C128,D520,D528,D800,D808,E770,E880,P300,P308,
X300,X308 added.
Read Flash - custom address range save fixed.
OM635x
X490,X495,X497 TFS flashing fixed.
SWIFT
D820,D828 flashing added.
Please run the upgrade client after you have installed the software,
follow the instructions careful as you may need to run the update client
more than once.
WARNING !!!
If the HWK is a "TRIAL" or affected by 3rd party tools, this software may not work properly, so use at your own risk.
|
|
|
|
|
|
|
|
N-Box Saras Soft
|
|
Friday, 10 March 2006
|
|
|
|
|
N-Box Saras Soft
v1.4_e
-----------
1. New BB5 GSM product: RM-70 (7370) introduced.
v1.4_x
------
TRIDENT
D720,D730,X660,X668,X800,X808 added.
OM635x
X490 added.
SWIFT
X700 added.
|
|
|
|
|
|
|
|
N-Box Installer 2.6.exe Released
|
|
Monday, 2 January 2006
|
|
|
|
|
N-Box_ACER v2.2_d
-----------------
1. API updated for new USB drivers.
N-Box_ATRz v1.6_l
----------------
1. API updated for new USB drivers.
N-Box_RTP v2.6_k
---------------
1. API updated for new USB drivers.
N-Box_SAMs v1.4_w
------------------
TRIDENT
E568,S410i,X150,X200,X208 added.
BT Address Change.
OM635x
E108,E330N,E335,X495,X497,X628 added.
SWIFT
D500E,D600E,D608,E340E,E348,E350E,E358 added.
M46Models revised.
--------------------------------------------------------------
HWK_DCTxBB5 v1.4_d
--------------------
1. New BB5 GSM products: RM-38,RM-56 (3250,6270) introduced.
2. Converter from 64K to 128Kb Paged CNT Files.
3. New products: RM-111,RM-127 (7380,7360)
4. PPM and CNT FILE_MM_TYPE report added (to handle a 6230i, new HWID phones)
HWK_KZF v1.8_d (HWK Required)
-------------------------------
1. Major and Minor bugs fixed.
2. Z1010 unlock problem fixed.
3. Fixed Recovery problem, path not found.
HWK_LG_GSM v1.0_c Beta (HWK Required)
----------------------------------------
1. Minor Bugs Fixed.
2. New products added.
Mototools v1.2.3 < Works only with UFS3 box UFS2 not works >
----------------
For moto P2K & MPX200
v1.2.3 Date Release 14.12.05
----------------------------------------
- BOOT 8.26 without TP suported
- bugs fixed
(Note This is not official sarassoft and it's 3rd party software which u
need to buy licence inorder to activate your box to run with the
software)
More information read the Licence Agerement in the installer
Also Some Nokia Flash updates!!!!!!
|
|
|
|
|
|
|
|
N-Box Installer 2.5.exe Released
|
|
Wednesday, 23 November 2005
|
|
|
|
|
HWK_LG_GSM v1.0_b Beta (HWK Required)
-----------------------------------------
1. Extended the supported model list.
HWK_DCTxBB5 v1.4_c
------------------
DCTx has now been dropped both HWK and none HWK use same version.
- 1. New products: RH-33, RH-73, RH-74, RM-82 (7200b,6060,6061,6111)
- 2. Corrected unlock problem for: RH-64, RH-70, RH-75.
- 3. Patcher for DCT4 ASIC2 products (for HWK , use only *.pat files)
- 4. Auto Selection of 64k and 128k CNT FAT Images.
N-Box_SAMs v1.4_v - Beta
------------------------
- 1. TRIDENT1. X140 added.
- 2. NAND Erase (E530,E720,E728) to fix "Blinking LCD"
- 3. Read Flash - custom address range support.
- 4. OM63591. X620 added.
- 5. SWIFT
- 6. D600 support added for HWK customers.
N-Box_ATRz v1.6_k - Beta
------------------------
1. Added support for J210
Mototools v1.2.1 < Works only with UFS3 box UFS2 not works >
----------------
For moto P2K & MPX200
(Note This is not officail sarassoft and it's 3rd party software which u
need to buy licence inorder to activate your box to run with the
software)
More information read the Licence Agerement in the installer
Also Some Nokia Flash updates!!!!!!
|
|
|
|
|
|
|
|
N-Box Installer 2.4.exe Released
|
|
Saturday, 17 September 2005
|
|
|
|
|
IMPORTANT:
HWK Required (HWK not included !!)
News on N-Box Installer 2.4
v1.3_m Date Release 16-09-2005
------------------
1. New ST flash chip M36L0R7040 (6030 problem).
2. Erase files flashing fixed.
3. MM Partition recreation for RM13,RM14,RM72,RM73.
v1.4u - Beta Date Release 16-09-2005
--------------------
1.Minor Bugs Fixed
HWK_DCTxBB5 v1.4_b (HWK Required) Date Release 16-09-2005
------------------------------------
1. New ST flash chip M36L0R7040 (6030 problem).
2. Erase files flashing fixed.
3. MM Partition recreation for RM13,RM14,RM72,RM73.
HWK_KZF v1.8_d (HWK Required) Date Release 16-09-2005
-------------------------------
1. Major and Minor bugs fixed.
2. Z1010 unlock problem fixed.
3. Fixed Recovery problem, path not found.
HWK_LG_GSM v1.0_a Beta (HWK Required) Date Release 16-09-2005
-----------------------------------------
1. Initial Public Release
v1.1.4 (Need Licence To Works) Date Release 14-09-05
--------------------------------------
- Fixed all Triplets minor bugs
- Added Rebuild SLZ for ALL supported models
(Note: Mototools activation is not FREE)
|
|
|
|
|
|
|
|
N-Box Installer 2.3.exe Released
|
|
Monday, 5 September 2005
|
|
|
|
|
MOTO_ACER v2.2_c
-----------------
1. Minor Bug Fixes and changes to bring inline with other modules.
ATRz v1.6_j
----------------
1. Minor bugs fixed.
2. Added Init SecBlk for J200M
DCTx v1.3_l
----------------
1. New products:
RH-64,RH-70,RH-75,RM-74,RM-75,RM-104.
2. Added support for new Samsung flash chips.
RTP v2.6_j
---------------
1. Minor bugs fixed.
SAMs v1.4_t - Beta
------------------------
1. TRIDENT
1. E530,E620,E728 added.
2. Individual BaudRate storage for each model in INI file.
2. SWIFT
1. E340,E350,E640,E648,E730,E738 added for HWK customers.
|
|
|
|
|
|
|
|
N-Box Installer 2.2.exe Released
|
|
Thursday, 28 July 2005
|
|
|
|
|
Dctx_v1.3_k
-------------------
1. New products: RM-76,RM-77,RM-94.
2. Added RM-72 (6230i) PPM and CNT flashing support.
3. Introduced PM editor.
4. Added support for GTI format Ask/Rpl files.
5. Added support for new fia files (falsh upgrade 3.26)
Eric_ATRZ V1.6_i
---------------------------------------------------
1. J200 added.
Eric_RTP V2.6_i
-------------------------------------
1. T290 added.
Samsung v1.4_s
-------------------------------
TRIDENT
C210,C230 Sharp Flash chip error fixed.
Moto_Acer 2.2b
-----------------------
Motorola software update version 2.2b
Bugs Fixed for New Serial Which detect 2 serial
New Licence Introduce
|
|
|
|
|
|
|
|
N-Box Installer v2.1.exe Released
|
|
Thursday, 23 June 2005
|
|
|
|
|
v1.3_k
--------
1. New products: RM-76,RM-77,RM-94.
2. Added RM-72 (6230i) PPM and CNT flashing support.
3. Introduced PM editor.
4. Added support for GTI format Ask/Rpl files.
5. Added support for new fia files (flash upgrade 3.26)
v1.4_r
------------
- COMMON
- OM platforms flashing bug fixed.
- Added new FLASH chips geometry and signatures.
- Ini file creation wizard for super-novice users.
- TRIDENT
- New products added:
C210,C230,E315,E316,E610,E720,E850,X480.
OM6357
- New product added: X640.
- SWIFT
- D508 support added for HWK customers.
**Thanks to SARAS For the updates**
|
|
|
|
|
|
|
|
N-Box Installer 2.0.exe Released
|
|
Wednesday, 11 May 2005
|
|
|
|
|
N-Box_Dctx_v1.3j
v1.3_j
--------
1. New products: RM-48,RM-69,RM72.
2. Minor bugs fixed.
N-box Eric_ARTZ 1.6.i
V1.6_i
-------
1. J200 added.
N-box eric RTP 2.6i
V2.6_i
-------
1. T290 added.
N-BOX Samsung 1.4q
v1.4_q
------
SWIFT
D500 support added for HWK customers.
TRIDENT
S341i, S342i support.
OM6357
E630 flashing bug fixed.
TFS 'spaced' filenames bug fixed.
N-Box Moto_Acer 2.2b
Motorola software update version 2.2b
Bugs Fixed for New Serial Which detect 2 serial.
New Licence Introduce
|
|
|
|
|
|
|
|
N-Box Installer 1.8.exe Released
|
|
Friday, 18 March 2005
|
|
|
|
|
Nbox Dctx_v1.3i
v1.3_i
1. Added RM-14 (7280) PPM and CNT flashing support.
2. Modified SimLocks logic.
3. New products: RM-30,RM31,RM51,RH68 (6020,6020b,3230,6670b)
4. 6230, 7610, 6820,... BT repair option.
5. New firmware introduced, this increases flashing speed.
6. Added JAVA files upload for NPL-1 (6310i)
7. Added SPC, XTKSL reading for CDMA.
8. New CDMA products: 2275,3205,3125,3570i,3585i,6011i,6012,6015,
6225,6370,6385,6585,8270
Eric_ATRZ 1.6i
V1.6_i
1. none
EricRTP 2.6i
V2.6_i
1. none
Samsung 1.4q
v1.4_q
1. none
|
|
|
|
|
|
|
|
N-Box Installer 1.7.exe Released
|
|
Thursday, 20 January 2005
|
|
|
|
|
DCTx_UFSx v1.3_g
1. RH-59 (2600), RH-60 unlock bug fixed
Eric RTP 2.6h - Eric ARTZ 1.6h
V1.6_h
1. Removed Xprotector
V2.6_h
1. Removed Xprotector
Samsung UFSx 1.4p
TRIDENT
C200 "Unknown Metrics" fixed for Fujitsu Flash Chips.
Moto_Acer 2.1b
1. Support C200 Flash, Unlock and Flex and User Manual
|
|
|
|
|
|
|
|
DCTx_UFSx v1.3_h Released
|
|
Thursday, 20 January 2005
|
|
|
|
|
v1.3_h
--------
1. RH-59 (2600), RH-60 unlock bug fixed.
v1.3_g
----------
1. RM-14, RM-17 auto detect bug fixed.
2. Memory Read added for DCT4, UPP ASIC's supported:
0011, 0010, 0120, 0121, 1015, 1120, 1131.
3. Improved user interface logic.
4. Xprotector removed.
v1.3_f
----------
1. New products (RH-27, RH-48, RH-57, RM-8, RM-14, RM-47)
2. Partial support for RA-2, RAE-6.
3. NHL-8 is splited in two separate products: 3650 and 3660.
4. Added PP (Product Profile) read/write.
5. New DSF component used.
6. New USB drivers approved.
According Nokia 9500 in new update cannot flash, but can do all UI functions:
Unlock, PM, PP read write , UEM read write ,Factory settings
6630 can only read INFO see details
and description that BB5 platform is not supported yet
v1.3_e
----------
1. New flash chips support
2. New products (RH-54, RH-59, RH-67, RM-17)
3. Minor bugs fixed.
1.3d
---------
1. Factory Defaults for DCT3 fixed (2100 Not Charging)
2. RM-25 (6260) product added.
3. minor bugs fixed.
v1.3_c
-----------
1. NPL-3 bug fixed.
2. Startup Logo fixed.
3. IMEI Data1 Backup, when Read UEM.
4. Format User Area for RH-12, RH-28, NMM-3.
|
|
|
|
|
|
|
|
DCTx v1.3_e Released
|
|
Friday, 29 October 2004
|
|
|
|
|
New in
this version: DCTx v1.3_e, RTP v2.6_f, ATRZ v1.6_f, Sams v1.4_m Beta and
USB Driver 1.06.14
It is recommended that you update to the latest USB Driver!!!
DCTx v1.3_e
------------
1. New flash chips support
2. New products (RH-54, RH-59, RH-67, RM-17)
3. Minor bugs fixed.
RTP v2.6_f
-----------
1. P910 model added
2. RSA Flash recovery bug fixed
3. Minor bugs fixed.
ATRz v1.6_f
------------
1. Minor bugs fixed.
Sams v1.4_m BETA
------------
Trident
-------
1. E810 support.
Common
--------
1. Minor bugs fixed.
|
|
|
|
|
|
|
|
SE P910 Flash Files
|
|
Friday, 29 October 2004
|
|
|
|
|
|
SE P910 Flash Files are now available in the support area
|
|
|
|
|
|
|
|
DCTx v1.3_d
|
|
Monday, 13 September 2004
|
|
|
|
|
DCTx v1.3_d
1. Factory Defaults for DCT3 fixed (2100 Not Charging)
2. RM-25 (6260) product added.
3. Minor bugs fixed.
|
|
|
|
|
|
|
|
RTP v2.6_e
|
|
Monday, 13 September 2004
|
|
|
|
|
RTP v2.6_e
1. RSA flags remove added.
2. Minor bugs fixed.
|
|
|
|
|
|
|
|
ATRz v1.6_e
|
|
Monday, 13 September 2004
|
|
|
|
|
ATRz v1.6_e
1. Minor bugs fixed.
|
|
|
|
|
|
|
|
Sams v1.4_l BETA
|
|
Monday, 13 September 2004
|
|
|
|
|
Sams v1.4_l BETA
OM6357
1. S500, S508 Support.
|
|
|
|
|
|
|
|
Nokia 1.3c
|
|
Tuesday, 7 September 2004
|
|
|
|
|
Samsung 1.4k,
Eric RTP 2.6d,
Eric ATRZ 1.6d
Released in Support Section
|
|
|
|
|
|
|
|
Nokia 1.3b
|
|
Friday, 6 August 2004
|
|
|
|
|
|
dctx_ufs_13b_ins.exe (3710 KB) released in Support Section
|
|
|
|
|
|
|
|
Samsung Newest 1.4i
|
|
Tuesday, 6 July 2004
|
|
|
|
|
|
sams_ufs_inst_14i.exe (1620 KB) released
|
|
|
|
|
|
|
|
Sony- Ericsson RTP and ATRZ
|
|
Tuesday, 6 July 2004
|
|
|
|
|
- eric_atrz_ins_16c.exe (1304 KB)
- eric_rtp_ins_26c.exe (1352 KB)
|
|
|
|
|
|
|
|
Siemens Freia ( Not made by SarasSoft)
|
|
Tuesday, 6 July 2004
|
|
|
|
|
- freia.exe (1534 KB)
- freiaufs2_st1.exe (939 KB)
- freiaufs2_st_.exe (1540 KB)
|
|
|
|
|
|
|
|
Mot-Acer 2.1b
|
|
Sunday, 6 June 2004
|
|
|
|
|
|
Mot_Acer_Ins_v21b.exe (372 KB)
|
|
|
|
|
|
|
|
|
No comments:
Post a Comment